Study on the Cold Formability of Drawn Non-heat Treated Steels

신선 가공된 열처리 생략강의 냉간 성형성에 대한 연구

  • 박경수 (포항공과대학교 신소재공학과) ;
  • 박용규 (포스코 기술개발실) ;
  • 이덕락 (포스코 기술연구소) ;
  • 이종수 (포항공과대학교 신소재공학과)
  • Published : 2003.05.01

Abstract

Non-heat treated steels are attractive in the steel-wire industry since the spheroidization and quenching-tempering treatment are not involved during the processing. In this study, three different steels such as dual phase steel, low-Si steel, and ultra low carbon bainitic steel were used to investigate their deformation resistance and forming limit. Deformation resistance was estimated by calculating the deformation energy and the forming limit was evaluated by measuring the critical strain revealing crack initiation at the notch tip of the specimens. The results showed that deformation resistance was the lowest in the low-Si steel, and the forming limit strain was the highest in the ultra low carbon bainitic steel.