Protection and Electrostatic Analysis of the Industrial Type Inkjet Plotter using FEM

유한요소법을 이용한 산업용 잉크젯 플로터의 정전기 해석과 대책

  • Yoon, S.Y. (DGI Cop., Technical Research Institute) ;
  • Choi, G.S. (DGI Cop., Technical Research Institute) ;
  • Kim, Y. (Dept. of Electrical Eng., Dongguk University) ;
  • Baek, S.H. (Dept. of Electrical Eng., Dongguk University)
  • 윤신용 (디지아이(주) 기술연구소) ;
  • 최근수 (디지아이(주) 기술연구소) ;
  • 김용 (동국대학교 전기공학과) ;
  • 백수현 (동국대학교 전기공학과)
  • Published : 2005.07.18


This paper was represented an electrostatics distribution analysis using FEM(finite element method) with industrial type Inkjet plotter. Here, we know electronic value with each system position by experiment. these were decreased by discharge through earth and electricity shielding. According to industrial development, all fields using chemical instrument and material are generated an electrostatics. Based on these, the big large position of electrostatics was obtained metal base of controller, nonconductor fiber between two rubber roller, head controller by moving roller etc., Therefore these were showed an electrostatics generation source and by rubbing and meager profits electric charge.