Design of Control System for 1kW Grid-connected Permanent Magnet Synchronous Generator

가스 엔진용 1kW급 계통 연계 영구자석형 동기발전기 구동 시스템 설계

  • 이태영 (건국대학교 전력전자연구실) ;
  • 조영훈 (건국대학교 전력전자연구실)
  • Published : 2017.11.24


This paper presents design of control system for permanent magnet synchronous generator(PMSG). The gas engine make rotating mechanical energy from gas fuel energy. The rotor of synchronous generator is connected to axis of engine. And it converts the mechanical energy to the electrical energy. The control system of PMSG helps the electrical energy to flow to grid. the single phase pfc rectifier controls the DC-link voltage by controlling the current of filter inductor. If the DC-link voltage is higher than the voltage reference, the filter current could be controlled to flow to grid. The three phase inverter controls the stator current of generator. The direction of the current is controlled depends on motoring or generating mode. The feasibility of the grid-connected PMSG is verified by the experimental results with 1kW prototype.



Supported by : 한국에너지기술평가원(KETEP)