A Study on Curing Reaction of 1-Chlorobutadiene-Butadiene Copolymer by Moisture

1-Chlorobutadiene-Butadiene Copolymer의 수가교반응(水架橋反應)에 관한 연구(硏究)(II)

  • Yoo, Chong-Sun (Department of Chemical Engineering, Kyung Hee Univ.) ;
  • Paik, Nam-Chul (Department of Chemical Engineering, Kyung Hee Univ.)
  • 유종선 (경희대학교 화학공학과) ;
  • 백남철 (경희대학교 화학공학과)
  • Published : 1987.12.31


In this study, as one of the developing ways of the functional elastomer, improvement of the functionality of 1-Chlorobutadiene-Butadiene Copolymer(CB-BR) was attempt through curing reaction by moisture. The curing reaction of CB-BR was determined an use of $\gamma$-Aminopropyltriethoxysilane(APS) and $\gamma$-Aminopropylmethyldiethoxysilane(ADS) as a crosslinking agent with filler at so the uncrosslinked elastomer was exposured in the air and curing reaction by moisture in the air was studied. The results obtained are as follows. 1. APS was more efficient than ADS as a crosslinking agent for CB-BR 2. Optimum amount of APS for moisture cured elastomer was r=1.5(at the ratio of $[APS]/[Cl^*]$) also in case(r=1.5), elastomer formed after soaking $T_{72}$ had similar physical properties with elastomer crosslinked by sulfur and it was very good. 3. Uncrosslinked elastomer(CB-BR+APS+Silica) was easily crosslinked by exposure to the air, and the physical properties was also satisfactory.