Abstract

Li-ferrite powders were prepared from mixture of Fe and Li salts using a hydrothermal method. Their crystal structure, microstructure and magnetic property were investigated with X-ray diffraction analysis, chemical analysis, SEM, and VSM. In the case of using FeCl3 as a precursor, Li-ferrite powders were synthesized. However, Fe3O4 was formed when the precursor was a divalented Fe2SO4 or FeCl2. The precipitation rate of Li-ferrite was increased as the reaction temperature increased. The optimum conditions of synthesis were the mole ratio of Fe+++/Li+=2, pH 13, the reaction temperature of 25$0^{\circ}C$ and the reaction time of 120min. With this condition, the spherical particles with good dispersion were obtained with average particle size of 0.4${\mu}{\textrm}{m}$ and saturation magnetization of 65 emu/g.

Keywords

Li-ferrite;Hydrothermal method

File

Download PDF

References

1. 工業化學雜誌 v.65 no.11 スビネル 型微微粒子 フエライトの 生成 佐藤壽彦;杉原眞;齋藤實
2. J. Am. Ceram. Soc. v.36 no.9 Hydrothermal Synthesis G.W. Morey
3. Ceramic Materials for Electronics(2nd ed.) Relva C. Buchnan
4. 대한금속학회지 v.32 no.3 공침법에 의한 Li-ferrite 분말 제조 이종형;원창환
5. J. Am. Ceram. Soc. v.61 no.3-4 Material Loss and High Temperature phase Transition in Lithium Ferrite R.K. Mishra(et al.)
6. Ceramic Bulletin v.66 no.9 Hydrothermal Processing of Ceramics S.I. Hirano
7. Bull. Chem Soc. Jpn. v.49 no.7 Condition for the Formation of Compounds Consisting of BaO and Fe₂O₃ from Aqueous Suspensions M. Kiyama
8. Ceramic Bulletin v.67 no.10 Hydrothermal Synthesis of Advanced Ceramic Powders W.J. Dawson
9. ICF Conf. Proc.(6th) v.115 Size Control of Iron-Oxide Synthesized by the Hydrothermal Process F. Hasegawa;K. Tozawa
10. Introduction to the Principles of Ceramic Processing v.55 J.S. Reed
11. J. Am. Ceram. Soc. v.52 no.10 K.S. Mazdiyasni(et al.)