Wear Behaviors of ${Si_3}{N_4}$ under Various Sliding Conditions

미끄럼 환경의 변화에 따른 ${Si_3}{N_4}$의 마멸거동

  • Lee, Yeong-Jae (Dept.of Mechanical Engineering, Sungkyunkwan University)
  • 이영재 (성균관대학교 기계공학과)
  • Published : 1996.06.01


The wear behaviors of ${Si_3}{N_4}$ under the different sliding conditions were investigated. The cylinder-on-disc wear tester was used. Using the servo-metor, the sliding speed did ot alternate due to the frictional forces. Threekinds of loads and speeds were selected to watch the variation of the wear rates and the frictional forces. Also three kinds of sliding condition under a constant speed were used to see the effects of the oxidationand the abrasion. The contact pressure was more effective than the repeated cycle on the wear behavior of ${Si_3}{N_4}$. With the low loads, the effect of the asperity-failure was more dominant than that of oxidation and abrasion. As increasing the load, the effects of oxidation and abrasion were increased, but the asperity-failure effects were decreased. The wear particles destroyed the ozide layers formed on sliding surfaces. The wear rate could be decreased due to delaying the oxidation. The frictional power and the wear weight per time were usefuel to see the transition of wear.