DOI QR코드

DOI QR Code

A Study on the Effect of Fracture Delay of Intelligent FRP by Transparent Photoelastic Experimental Method

투과형 광탄성 실험법에 의한 지능성 FRP의 파괴지연 효과에 관한 연구

  • Published : 1999.11.01

Abstract

The most effective material in the shape memory alloy(SMA) is the TiNi alloy, because its shape recovery characteristics are very excellent. We molded the composite material with shape memory function. The fiber of it is $Ti_{50}-Ni_{50}$ shape memory alloy and matrix of it is epoxy resin(Araldite B41, Hardner HT903. Ciba Geigy), its adhesive and optical sensitivity are very excellent. It was assured that the composite material could be used as model material of photoelastic experiment for intelligent materials or structures. In this research, the composite material with shape memory function is used as model material of photoelastic experiment. Photoelastic experimental hybrid method is developed in this research, it is assured that it is useful on the obtaining stress intensity factor and the separation of stress components from only isochromatic data. The measuring method of stress intensity factor of intelligent material by photoelastic experiment is introduced. In the mode I state, we can know that stress intensity factors are decreased more than 50% of stress intensity factor of room temperature when temperature of fiber is greater than 4$0^{\circ}C$, prestrain greater than 5% and fiber volume ratio greater than 0.42% and that stress intensity factors are decreased by 100% when fiber volume ratio is greater than 0.84%, prestrain greater than 5% and temperature greater than 60 $^{\circ}C$.

Keywords

$Ti_{50}-Ni_{50}$ Shape Memory Alloy Fiber Epoxy Composite($Ti_{50}-Ni_{50}$ SMA-FEC);Shape Memory Alloy;Prestrain;Stress Intensity Factor;Fracture Delay;Fiber Volume Ratio;Hybrid Method

References

  1. 대한기계학회지 v.31 no.3 복합체 응력해석의 광탄성 실험법 황재석
  2. Experimental Mechanics v.10 A Stress-Optic Law for Photoelastic Analysis if Orthotropic Composites Sampson R. C.
  3. J. of Appl. Mech. v.51 A Hybrid/Finite Element Approach for Stress Analysis of Notched Anisotropic Materials Gerhardt T. D.
  4. 대한기계학회 논문집(A) v.22 no.3 형상기억효과를 가진 투과형 광탄성 실험용 모델재료 개발에 관한 연구 이효재;황재석;Akira Shimamoto
  5. Proc. of the Int. Symposium on Microsystems, Intelligent Materials and Robots Time Defendence of Crack Closure in Epoxy Matrix Composite Material With Embedded SMA Umezaki E.;Ikebe H.;Kawahara E.;Watanabe H.
  6. 대한기계학회논문집(A) v.22 no.6 직교이방성체 파괴역학에 투과형 광탄성 실험의 하이브릿 법 적용 신동철;황재석;남정환;이효재;권오성
  7. Proc. of the Int. Symposium on Microsystems, Intelligent Materials and Robots Active Control of Crack-up Stress Intensity By Contraction of Shape Memory TiNi Fibers Embedded in Epoxy Matrix Composite Shimamoto A.;Furuya Y.;Taya M.
  8. Plane Elastic Systems Milne Thomson L. M.
  9. Theory of Elasticity of an Anisotropic Body Lekhnitskii S. G.
  10. Journal of Material Science v.29 Shape Memory Effect by Constant-stress Aging in Ti50.50at% Ni alloy Jean, R. D.;Hu, C. T.