Dynamic Edger Control for the Precise Width Control at the Head, and Tail Ends of Hot Strip

열연강판 선후단부 폭 정밀도 개선을 위한 최적 엣저롤 개도 제어

  • 천명식 (포항산업과학연구원 압연프로세스연구팀) ;
  • 이준정 (포항산업과학연구원 압연프로세스연구팀) ;
  • 문영훈 (부산대학교 정밀정형 및 금형가공연구센터)
  • Published : 1999.07.01


adaption of the model predictions is highly desirable. In general, the width deviation at the head and tail ends of strip may be different from that of the steady state region. Therefore, the dynamic edger corrections can be used to compensate the width deviations which would otherwise occur. For the precise width control, the effect of edger roll gap and rolling conditions on the width deviation of head and tail ends of strip has been investigated and the effective method to decrease width deviation has been proposed. On-line application of dynamic edger control method in this study shows about 50% width compensation at the head end of the strip, and near perfect compensation at the tail end of strip.


Dynamic Edger Control;Automatic Width Control;Feed Forward Automatic Width Control;Hot Strip Rolling;Width Shortage;Width Deviation;Short Stroke Control;Horizontal Rolling;Dog-Bone Rolling