A Design of Microstrip U-slotted Patch Antenna

마이크로스트립 U슬롯 패치 안테나의 설계

  • 이진선 (연암공업대학 컴퓨터 정보기술과) ;
  • 강치운 (동의공업대학 전자통신과) ;
  • 윤서용 (경상대학교 부설 정보통신연구센터) ;
  • 이봉석 (경상대학교 부설 정보통신연구센터) ;
  • 김우수 (동의공업대학 전자통신과) ;
  • 이문수 (경상대학교 부설 정보통신연구센터)
  • Published : 1999.09.01

Abstract

In this paper, it is designed a microstrip U-slotted patch antenna with double resonances to enhance the bandwidth. In the design of an U-slotted patch antenna, there are considered the input impedance, the width of patch, the total length of the slot, the height of foam, the position of the probe and the radius of feed pin. The broadband behavior of antenna can be obtained by adjusting the length and width of the slot. The radiation from the antenna is linear polarized with the E-paine parallel to the vertical slots and the H plane parallel to horizontal slot. The radiation pattern, impedance locus, and VSWR of the antenna are calculated using "ENSEMBLE" software, and compared with the experimental results. Experimental results show that the bandwidth for VSWR $\le$ 2:1 is about 28.6%, a directivity 14.18dBi at 6.040GHz. 6.040GHz.

Keywords