DOI QR코드

DOI QR Code

A Study on the Coated Characteristics of Ceramic Tools

세라믹공구 재료의 피복특성에 관한 연구

  • Published : 2000.04.01

Abstract

Ceramic, PCD and CBN tools are available for the difficult-to-cut-materials such as hardened carbon tool steel, stainless steel, Inconel 718 and etc. Ceramic tools are likely to be chipped and abruptly broken before the appearance of normal wear in turning. Ceramic tools are suitable for continuous in turning, not for intermittent in milling. In this study, TiN/TiCN multi-layer coated ceramic tools were found to restrain the chipping, breaking and early fracture and to increase the critical cutting speed owing to TiN/TiCN multi-layer coating in Arc Ion Plating of PVD method.

Keywords

Ceramic Tool;TiN/TiCN Multi-Layer Coated Ceramic Tool;PVD;CVD;Difficult-to-Cut-Material;Critical Cutting Speed;Catastrophic;Breaking;Early Fracture

References

  1. Young, H.Y., Mathew, P. and Oxely, P.L.B., 1987, 'Allowing for Nose Radius Effects in Predicting the Chip Flow Direction and Cutting Forces in Bar Turning,' Proc. Int. Mech. Engg. Part C., Vol. 201, No. 3, pp. 213-226
  2. Dow, W. E., 1994, Ceramic Cutting Tool, Noyes Publications, New Jersey
  3. 이영문외 4인, 1996, '코팅공정 개선에 의한 TiN 코팅 고속도강 공구의 내마모성 특성 향상,' 한국정밀공학회, 제13권, 제11호, pp. 32-137
  4. Thornton,J.A.,1984, 'Influence of Apparatus Geometry and Deposition Condition on Structure and Topography of Thick Sputtered TiN Films,' Thin Solid Films, 122, pp. 115-129 https://doi.org/10.1116/1.1312732
  5. Suh, N. P., 1980, 'Coated Carbides-Past Present and Future,' Proc. 4th. Int. Conf. Prod. Engg., pp.118-143
  6. 大俗敏昭, 藤瀨健領 황川 洪, 三井式良男, 1983, 'CBNおよび??ミックミ工具による燒入鋼の旅削,' 精密機械, 第49卷, 第6號, pp. 804-808