DOI QR코드

DOI QR Code

Cut-off Grinding Characteristics of the Carbon Fiber Epoxy Composite Materials

탄소 섬유 에폭시 복합재료의 절단 연삭 특성

  • Published : 2000.02.01

Abstract

Although the net-shape molding of composites is generally recommended, molded composites are frequently required cutting or grinding due to the dimensional inaccuracy for precision machine elements . During the composite machining operations such as cutting and grinding, the temperature at the cutting point may increase beyond the allowed limit due to the low thermal conductivity of composites, which might degrade the matrix of composite. Therefore, in this work, the temperature at the cutting point during cut-off grinding of carbon fiber epoxy composites was measured. The cutting force and surface roughness were also measured to investigate the cut-off grinding characteristics of the composites. The experiments were performed both under dry and wet grinding conditions with respect to cutting speed and feed rate. From the experimental investigation, the optimal conditions for the composite cut-off grinding were suggested.

Keywords

Cut-off Grinding;Carbon Fiber Epoxy Composite;Maching Temperature;Surface Roughness;Cutting Force

References

  1. Park, K. Y., Choi, J. H. and Lee, D. G., 1994, 'Highly Precise and Effecient Drilling of Carbon Fiber Reinforce Plastics,' KSME, Vol. 18, No. 12, pp. 3175-3184
  2. Bhatnagar, N., Ramakrishnan, N., Naik, N. K. and Komanduri, R., 1995, 'On the Machining of Fiber Reinforced Plastic (FRP)Composite Laminates,' Int. J. Mach, Tools Manufact., Vol. 35, pp. 701-716 https://doi.org/10.1016/0890-6955(95)93039-9
  3. Oh, J. H., Kim, J. K., Lee, D. G. and Jeong, K. S., 'Interlaminar Shear Behavior of Thick Carbon/Epoxy Composite Materials,' Journal of Composite Materials(in press) https://doi.org/10.1177/002199839903302202
  4. Jaeger, J. C., 1942, 'Moving Sources of Heat and the Temperature at Sliding Contacts,' Journal and Proc. of the Royal Society of New South Wales, Vol. 76, pp. 204-224
  5. Lee, D. G., Zerkle, R. D. and DesRuisseaux, N. R., 1972, 'An Experimental Study of Thermal Aspects of Cylindrical Plunge Grinding,' ASME Journal of Engineering for Industry, Vol. 94, pp. 1206-1214
  6. Malkin, S. and Anderson, R. B., 1974, 'Thermal Aspects of Grinding. Part I-Energy Partition,' ASME Journal of Engineering for Industry, Vol. 96, pp. 1177-1183
  7. MAlkin, S., 1974, 'Thermal Aspects of Grinding. Part 2-Surface Temperatures and Workpiece Burn,' ASME Journal of Engineering for Industry, Vol. 96, pp. 1177-1183
  8. Eshighy, S., 1967, 'Thermnal Aspects of the Abrasive Cutoff Operation. Part 1-Theoretical Analysis,' ASME Journal of Engineering for Industry, Vol. 89, pp. 356-360
  9. Eshghy, S., 1968, 'Thermal Aspects of the Abrasive Cutoff Operation. Part 2-Partion Functions and Optimum Cutoff,' ASME Journal of Engineering for Industry, Vol. 90, pp. 360-364
  10. Bang, K. G., Choi, J. K., Kim, H. S., Lee, D. G. and Jeon, H. S., 1997, 'Development of Guide Roller Using Electroplated Carbon Fiber Composite for Thin Polymer Film Processing,' Composite Structure, Vol. 38, pp. 321-328 https://doi.org/10.1016/S0263-8223(97)00066-4
  11. Lee, D. G., Jeong, K. S., Kim, K. S. and Kwak, Y. K., 1993, 'Development of the Anthropomorphic Robot with Carbon Fiber Epoxy Composite Material,' Composite Structures, Vol. 25, pp. 313-324
  12. Choi, J. K. and Lee, D. G., 1997, 'Manufacturing of a Carbon Fiber-Epoxy Composite Spindle-Bearing System for a Machine Tool,' Composite Structures, Vol. 37, pp. 241-251
  13. 이대길, 정광섭, 최진호, 1998, 복합재료 역학 및 제조 기술, 시그마프레스, pp. 249-284
  14. Wang, D.H., Ramulu, M. and Arola, D., 1995, 'Orthogonal Cutting Mechanism of Graphite/Epoxy Composite,' Int. J. Mach. Tools Manufact., Vol. 35, pp. 1623-1638 https://doi.org/10.1016/0890-6955(95)00014-O
  15. Park, K. Y., Lee, D. G. and Nakagawa, T., 1994, 'Mirror Surface Grinding Characteristics and Mechanism of Carbon Fiber Reinforced Plastics,' KSME, Vol. 18, No. 10, pp. 2514-2522