DOI QR코드

DOI QR Code

Design Process of Robotic Cell and Layout Design Tool

로봇 셀 설계절차와 레이아웃 작업 지원 도구

  • Published : 2000.06.01

Abstract

In this study, a design process of robotic cell is presented. This paper focuses only on the automation of workpiece handling with robot. The presented design process enables us to analyze effectiv ely the original production system and to redesign it as an optimum production system with robots. An original production system is analyzed with respect to its economical and technological requirements for automation. If automation of the given production system is feasible, the conceptual design for automation is firstly derived. Next, the detail design is derived for the optimum conceptual design. Finally, an optimum system solution is determined after the economical and technical evaluation of all the derived detail designs. The all specifications of each element of the redesigned production system and its layout are determined at the detail design phase. This paper shows a low cost supporting tool for layout design of robotic cell with SCARA type robots.

Keywords

Robotic Cell;Workpiece Handling;Production Automation;System Engineering;Layout Design

References

  1. Adam G.K., and Grant E., 1994, 'QMTOOL-A Qualitative Modelling and Simulation CAD System for Designing Automated Workcells,' IEEE Int. Conf. on Robotics and Automation, pp. 1141-1146
  2. Rossgoderer U., Woenckhaus C, Reinhart G., and Milberg J., 1995, 'A Concept for Automatical Layout Generation,' IEEE Int. Conf. on Robotics and Automation, pp. 800-805 https://doi.org/10.1109/ROBOT.1995.525381
  3. Heilala J., 1997, 'Simuation-Based Design of Modular Assembly System-Developing Reusable Simulation Module Library,' User Group 1997 Proceedings, Deneb Robotics, Inc., pp. 11-16
  4. 박홍석, 1996, '로봇 응용을 위한 공정 지향 적인 프로그래밍 시스템 개발,' 한국정밀공학회지, 제13권 제4호, pp. 34-42
  5. SonY.K., 1996, 'A Decision Support System for Factory Automation: A Case Study,' Int. J. Prod. Res., Vol. 29, No. 7, pp. 1461-1473 https://doi.org/10.1080/00207549108948023
  6. 한국기계연구소, 1991, '조립 자동화 시스템 개발(I),' 과학기술처
  7. 오상록, 1992, '산업용로봇 활용기술(II) (실례편),' 도서출판 기술
  8. Jahresbericht, 1995, Fraunhofer Institut Produktionstechnik und Automatisierung
  9. Jahresbericht, 1996, Fraunhofer Institut Produktionstechnik und Automatisierung
  10. Asfahl C. R., 1992, Robots and Manufacturing Automation, John Wiley & Sons
  11. Agrawal V.P., Kohli V.,and Gupta S. , 1991, 'Compter Aided Robot Selection: the 'Multiple Attribute Decision Making' Approach,' Int. J. Prod. Res., Vol. 29, No. 8, pp. 1629-1644
  12. Agrawal V.P., Verma A., and Agarwal S., 1992, 'Computer-Aided Evaluation and Selection of Optimum Grippers,' Int. J. Prod. Res., Vol. 30, No. 11, pp. 2713-2732
  13. Lim L.E.N., Ngoi B.K.A., Lee S.S.G., Lye S.W., and Tan P.S., 1994, 'A Computer-Aided Framework for the Selection and Sequencing of Orientating Devices for the Vibratory Bowl Feeder,' Int. J. Prod. Res., Vol. 32, No. 11, pp. 2513-2524 https://doi.org/10.1080/00207549408957081
  14. Asaad S., Bishay M., Wilkes D.M., and Kawamura K., 1996, 'A Low-Cost, DSP-Based, Intelligent Vision System for Robotic Applications,' IEEE Int. Conf. on Robotics and Automation, pp. 1656-1661 https://doi.org/10.1109/ROBOT.1996.506950
  15. Kaiser M., and Dillman R., 1996, 'Building Elementary Robot Skills from Human Demonstration,' IEEE Int. Conf. on Robotics and Automation, pp. 2700-2705 https://doi.org/10.1109/ROBOT.1996.506570
  16. Fujimoto H., and Yamamoto H., 1994, 'Production Line Design Expert System by Multiobjective Evaluation Reasoning Including Fuzzy Knowledge,' IEEE Int. Conf. on Robotics and Automation, pp. 2267-2272 https://doi.org/10.1109/ROBOT.1994.350948
  17. Dissanayake M.W.M.G., and Gal J.A., 1996, 'Workstation Planning for Redundant Manipulators,' Int. J. Prod. Res., Vol. 32, No. 5, pp. 1105-1118 https://doi.org/10.1080/00207549408956990
  18. Logendran R., and Sriskandarajah C, 1996, 'Sequencing of Robot Activities and Parts in Two-Machine Robotic Cells', Int. J. Prod. Res., Vol. 34, No. 12, pp. 3447-3463 https://doi.org/10.1080/00207549608905099
  19. Seifoddini H., and Djassemi M., 1997, 'Determination of a Flexibility Range for Cellular Manufacturing Systems Under Product Mix Variations', Int. J. Prod. Res., Vol. 35, No. 12, pp. 3349-3366 https://doi.org/10.1080/002075497194110
  20. Brennemann A.E., Hammer R., Hollis R.L., and Jecusco II W.V., 1994, 'Accurate Alignment of Laminate Materials Using Sensor-Based Robot Techniques,' IEEE Int. Conf. on Robotics and Automation, pp. 2273-2278 https://doi.org/10.1109/ROBOT.1994.350947
  21. Burgess A.G., Morgan I., and Vollmann T.E., 1993, 'Celluar Manufacturing: Its Impact on the Total Factory,' Int. J. Prod. Res., Vol. 31, No. 9, pp. 2059-2077 https://doi.org/10.1080/00207549308956844