Shakedown Analysis of Shaft in Bearing-Shaft Assembly

베어링-축 조립체에서 축의 셰이크다운에 관한 연구

Park, Heung-Geun;Park, Jin-Mu;O, Yun-Chan

  • Published : 2000.07.01


Under repeated rolling, initial plastic deformation introduces residual stresses which render the steady cyclic state purely elastic. This is called the process of shakedown. Many studies have been done about the shakedown in semi-infinite half space using calculated Hertizian pressure. In this paper shakedown processes in a shaft are studied by finite element analyses of a two dimensional(plane strain) model with elastic-linear-kinematic-hardening-plastic material subjected to repeated, frictionless rolling contact. Symmetric and non-symmetric pressure distributions are obtained using a simplified model of the bearing-shaft assembly. The rolling contact is simulated by repeatedly translating both pressure distributions along the surface of the shaft. By the influence of the non-symmetric pressure, larger residual radial tensile stress is generated in the immediate subsurface layer, which may make a crack propagate and, the subsurface undergoes a zigzag plastic deformation during the shakedown process, which may lead to a crack initiation.


Shakedown;Contact;Finite Element Method;Residual Stress;Plastic Deformation;Crack Driving Force


  1. 이강용, 김준엽, 1997, '구름 및 미끄럼 접촉하의 중공원판의 표면 하층균열에 대한 J-적분,' 대한기계학회논문집(A), 제21권, 제7호, pp. 1149-1155
  2. Komvopoulos, K. and Cho, S.-S., 1997, 'Finite Element Analysis of Subsurface Crack Propagation in a Half=space due to a Moving Asperity Contact,' Wear, Vol. 209, pp. 57-68
  3. Hahn, G.T., Bhargava, V., Rubin, C.A., Chen, Q. and Kim, K., 1987, 'Analysis of the Rolling Contact Residual Stresses and Plastic Deformation of SAE 52100 Steel Ball Bearings,' J. of Tribology, Vol. 109, pp. 618-625
  4. Voskamp, A.P. and Mittemeijer, E.J., 1997, 'State of Residual Stress. Induced by Cyclic Rolling Contact Loading,' Material Sciences and Technology, Vol. 13, pp. 430-438
  5. Lei, T.S., Bhargaa, V., Hahn, G.T. and Rubin, C.A., 1986, 'Stress Intensity Factors for Small Cracks in the Rim of Disks and Rings Subjected to Rolling Contacts,' J. of Tribology, Vol. 108, pp. 540-544
  6. O'Regan, S.D., Hahn, G.T. and Rubin, C.A., 1985, 'The Driving Force for Mode II Crack Growth under Rolling Contact,' Wear, Vol. 101, pp. 333-346
  7. Suh, N.P., 1977, 'An Overview of the Delamination Theory of Wear,' Wear, Vol. 44, pp. 1-16
  8. Williams, J.A., Dyson, I.N. and Kapoor, A., 1999, 'Repeated Loading Residual Stresses, Shakedown, and Tribology,' J. of Materials Research, Vol. 14, pp. 1548-1559
  9. Bhargava, V., Hahn, G.T. and Rubin, C.A., 1985, 'An Elastic-Plastic Finite Element Model of Rolling Contact, Part 1: Analysis of Single Contact,' J. of Applied Mechanics, Vol. 52, pp. 67-74
  10. Bhargava, V., Hahn, G.T. and Rubin, C.A., 1985, 'An Elastic-Plastic Finite Element Model of Rolling Contact, Part 2: Analysis of Repeated Contacts,' J. of Applied Mechanics, Vol. 52, pp. 75-82
  11. Johnson, K.L., 1987, Contact Mechanics, Cambridge University Press
  12. Merwin, J.E. and Johnson, K.L., 1963, 'An Analysis of Plastic Deformation in Rolling Contact,' Proc. Institution of Mechanical Engineers, Vol. 177, pp. 670-690
  13. Kral, E.R. and Komvopoulos, K., 1996, 'Three-Dimensional Finite Element Analysis of Surface Deformation and Stresses in and Elastic-Plastic Layered Medium Subjected to Indentation and Sliding Contact Loading,' J. of Applied Mechanics, Vol. 63, pp. 365-375
  14. Wong, S.K., Kapoor, A. and Williams, J.A., 1997, 'Shakedown Limits on Coated and Engineered Surface,' Wear, Vol. 203, pp. 162-170