# Z-영역에서 입력성형기의 설계와 민감도 해석

• Published : 2000.07.01
• 68 3

#### Abstract

Input shaping method is to convolute input shaper, which is sequence of impulses, with reference input command not to excite the natural frequency of system. To reduce residual vibration for the ch ange of frequency, the number of impulses should be increased. Until now, amplitudes and time interval of those has been searched from the derivative of residual vibration. However, if time interval of impulses is fixed as the half of vibration period of system, input shaper H(z) in z-domain becomes (I-pz-1)n/K in which increasing n is the mean that robustness for change of parameter is improved. Also, design of many types of input shapers in z-domain is very easy because sensitivity curve is displayed with $\mid$H(z)zn$\mid$$\times$100. In the z-domain, EI(Extra-Insensitive) input shaper could be designed without solving nonlinear simultaneous equations as design in continuous time domain. In addition to, the design possibility of input shaper for a damped system was shown.

#### Keywords

EI(Extra-Insensitive);Input Shaping;Residual Vibration;Sensitivity Curve;Z-Domain

#### References

1. Singhose W.E., Seering W. P. and Singer N.C., 1997, 'Time-Optimal Negative Input Shapers,' ASME, Vol. 119, pp. 198-205
2. Murphy Brett R. and Watanbe Ichiro, 1992, 'Digital Shaping Filters for Reducing Machine Vibration,' IEEE Transaction on Robotics and Automation, Vol. 8, No. 2, pp. 285-289 https://doi.org/10.1109/70.134281
3. Tuttle T. D. and Seering W. P., 1994, 'A Zero-placement Technique for Designing Shaped Inputs to Suppress Multiple-mode Vibration,' AmericanControl Conference https://doi.org/10.1109/ACC.1994.735015
4. Porter L.J., Singhose W.E., Tuttle T.D., and Singer N.C., 1997, 'Vibration Reduction Using Multi-Hump Input Shapers,' ASME, J. DSMC Vol. 119, June, pp. 320-326
5. Singer N.C. and Seering W.P., 1990, 'Preshaping Command Inputs to Reduce System Vibration,' ASME Journal of Dynamic System, Measurement and Control, Vol. 112, pp. 76-82
6. Singhose W.E. and Singer N.C., 1996, 'Extra-Insensitivity Input Shapers for Controlling Flexible Spacecraft,' Guidance Control. and Dynamics, Vol. 19. No. 2 March-April
7. Tallman, Smith, 1958, 'Analog Study of Dead-Beat Posicast Control,' IRE Transactions on Automatic Control, Vol. AC-3, pp. 14-23