DOI QR코드

DOI QR Code

Transverse Shear Deformation in the Cylindrical Bending of Laminated Plates

적층판의 원통형 굽힘에 대한 횡방향 전단병형

  • Published : 2000.11.01

Abstract

This paper presents a new laminated plate theory for the cylindrical bending of laminated plated. The theory assumes that in plane displacements vary exponentially through plate thickness. Analytical solutions are derived for simply supported plates subjected to transverse loading. The accuracy of the present theory is examined for unsymmetric laminates, and the numerical results are compared with three-dimensional elasticity solutions of Pagano. The present theory predicts displacements and stresses for very thick plates very accurately. In particular, transverse shear stresses obtained form constitutive equations are predicted very accurately.

Keywords

Laminated Plate Theory(적층판 이론);Cylindrical Bending(원통형 굽힘);Transverse Shear Stress(횡방향 전단응력)

References

  1. Pagano, N. J., 1969, 'Influence of Shear Coupling in Cylindrical Bending of Anisotropic Laminates,' Journal of Composite Materials, Vol. 4, pp. 330-343 https://doi.org/10.1177/002199837000400305
  2. Pagano, N. J., 1969, 'Exact Solutions for Composite Laminates in Cylindrical Bending,' Journal of Composite Materials, Vol. 3, pp. 398-411 https://doi.org/10.1177/002199836900300304
  3. Di Sciuva, M., 1986, 'Bending, Vibration and Buckling of Simply Supported Thick Mutilayered Orthotropic Plates: An Evaluation of a New Displacement Model,' Journal of Sound and Vibration, Vol. 105, pp. 425-442 https://doi.org/10.1016/0022-460X(86)90169-0
  4. Murakami, H., 1986, 'Laminated Composite Plate Theory with Improved In-plane Responses,' ASME, Journal of Applied Mechanics, Vol. 53, pp. 661-666
  5. Toledano, A. and Murakami, H., 1987, 'A High-Order Laminated Plate Theory with Improved In-plane Responses,' International Journal of Solids and Structures, Vol. 23, pp. 111-131 https://doi.org/10.1016/0020-7683(87)90034-5
  6. Cho, M. and Parmerter, R. R., 1992, 'An Efficient Higher-Order Plate Theory for Laminated Composites,' Composite Structures, Vol. 20, pp. 113-123 https://doi.org/10.1016/0263-8223(92)90067-M
  7. Cho, M. and Parmerter, R. R., 1993, 'Efficient Higher Order Composite Plate Theory for General Lamination Configurations,' AIAA Journal, Vol. 31, pp. 1299-1306
  8. Yang, P. C., C. H. Norris and Stavsky, Y., 1966, 'Elastic Wave Propagation in Heterogeneous Plates,' International Journal of Solids and Structures, Vol. 2, pp. 665-684 https://doi.org/10.1016/0020-7683(66)90045-X
  9. Whitney, J. M. and Pagano, N. J., 1970, 'Shear Deformation in Heterogeneous Anisotropic Plates,' ASME, Journal of Applied Mechanics, Vol. 37, pp. 1031-1036
  10. Whitney, J. M., 1969, 'The Effect of Transverse Shear Deformation on the Bending of Laminated Plates,' Journal of Composite Materials, Vol. 3, pp. 534-547 https://doi.org/10.1177/002199836900300316
  11. Lo, K. H., Christensen, R. M. and Wu, E. M., 1977, 'A High-Order Theory of Plate Deformation, Part 2: Laminated Plates,' ASME, Journal of Applied Mechanics, Vol. 44, pp. 669-676
  12. Murthy, M. V. V., 1981, 'An Improved Transverse Shear Deformation Theory for Laminated Anisotropic Plates,' NASA Technical Paper 1903
  13. Reddy, J. N., 1984, 'A Simple Higher-Order Theory for Laminated Composite Plates,' ASME, Journal of Applied Mechanics, Vol. 51, pp. 745-752