DOI QR코드

DOI QR Code

Analysis for Densification Behavior and Grain Growth of Nanocrystalline Ceramic Powder under High Temperature

나노 세라믹 분말의 고온 치밀화와 결정립 성장의 해석

  • Published : 2000.11.01

Abstract

Densification, grain growth, and phase transformation of nanocrystalline ceramic powder were investigated under pressureless sintering, sinter forging, and hot pressing. A constitutive model for densification of nanocrystalline ceramic powder was proposed and implemented into a finite element program (ABAQUS). A grain growth model was also proposed by including the effect of applied stress on grain growth when phase transformation occurs. Finite element results by using the proposed models well predicted densification behavior, deformation, and grain growth of nanocrystalline titania powder during pressureless sintering, sinter forging, and hot pressing. Finite element results by using the proposed model also well predicted experimental data in the literature for densification behavior of nanocrystalline zirconia powder during pressureless sintering and sinter forging.

Keywords

Nanorystalline Ceramic Powder(나노 세라믹 분말);Densification(치밀화);Grain Growth(결정립 성장);Pressureless Sintering(상압소결);Sinter Forging(일축 압축 소결);Hot Pressing(금형 입축 소결);Constitutive Model(구성 모델);Finite Element Analysis(유한요소해석)

References

  1. Lagneborg, R., 1978, 'Creep Deformation Mechanisms,' in Creep of Engineering Materials and Structures edited by Bernascini, G. and Piatti, G., Applied Science Publishers, London, p. 7
  2. Kim, H.G., 2000, The Analysis on Densification Behavior and Grain Growth of Nanocrystalline Ceramic Powder under High Temperature, Ph. D Thesis, Pohang University of Science and Technology, Pohang, Korea
  3. Poirier, J.P, 1985, Creep of Crystals: High-Temperature Deformation Processes in Metals, Ceramics and Minerals, Cambridge University Press, Cambridge, pp. 1-37
  4. Owen, D.M. and Chokshi, A.H., 1994, 'The Constant Stress Tensile Creep Behaviour of a Superplastic Zirconia-Alumina Composite,' J. Mat. Sci., Vol. 29, pp. 5467-5474 https://doi.org/10.1007/BF01171563
  5. 권영삼, 김기태, 1994, '알루미나 분말 성형체의 고온 치밀화 성형 공정을 위한 유한요소해석,' 한국요업학회지, 제 31 권, 제 4 호, pp. 347-358
  6. ABAQUS User's Manual, Hibbitt, Karlsson and Sorrensen, 1999
  7. Kingery, W.D., Bowen, H.K., and Uhlmann, D.R., 1976, Introduction to Ceramics, John Wiley & Sons, New York, p. 425
  8. Kumar, K.P., Keizer, K., Burggraaf, A.J., Okubo, T., Nagamoto, H., and Morooka, S., 1992, 'Densification of Nanostructured Titania Assisted by Phase Transformation,' Nature, Vol. 358, No. 2, pp. 48-51 https://doi.org/10.1038/358048a0
  9. Cocks, A.C.F., 1994, 'The Structure of Constitutive Laws for the Sintering of Fine Grained Materials,' Acta. Metall. Mater., Vol. 42, No. 7, pp. 2191-2210
  10. 김홍기, 김기태, 1997, '지르코니아 분말 성형체의 고온 치밀화 거동과 결정립 성장,' 대한기계학회논문집(A), 제 21 권, 제 8 호, pp. 1175-1187
  11. McMeeking, R.M. and Kuhn, L.T., 1992, 'A Diffusional Creep Law for Powder Compacts,' Acta. Metall. Mater., Vol. 40, No. 5, pp. 961-969 https://doi.org/10.1016/0956-7151(92)90073-N
  12. Ashby, M. F., 1990, Background Reading, HIP 6.0, Univ. of Cambridge, pp. 1-58
  13. 김홍기, 김기태, 1999, 'n-$TiO_2$ 분말성형체의 고온 치밀화 거동,' 대한기계학회 논문집 (A), 제 23 권, 제 10 호, pp. 1797-1807
  14. 권영삼, 김기태, 1995, '세라믹 분말의 고온 치밀화 성형(1)- 구성 모델과 실험,' 대한기계학회논문집(A), 제 19 권, 제 10 호, pp. 2555-2566
  15. Suryanarayanan Iyer, R. and Sastry, S.M.L., 1999, 'Consolidation of Nanoparticles-Development of a Micromechanisitic Model,' Acta. Mater., Vol. 47, No. IO, pp. 3079-3098 https://doi.org/10.1016/S1359-6454(99)00116-0
  16. Kim, H.G. and Kim, K.T., 1999, 'Densification Behavior of Nanocrystalline Titania Powder Compact under High Temperature,' Acta Mater., Vol. 47, No. 13, pp. 3561-3570 https://doi.org/10.1016/S1359-6454(99)00230-X
  17. Hague, D.C. and Mayo, M.J., 1999, 'Sinter-Forging of Nanocrystalline Zirconia: II, Simulation,' J. Am. Ceram. Soc., Vol. 82, No. 3, pp. 545-555
  18. Hague, D.C. and Mayo, M.J., 1997, 'Sinter-Forging of Nanocrystalline Zirconia: I, Experimental,' J. Am. Ceram. Soc., Vol. 80, No. 11, pp. 149-156 https://doi.org/10.1111/j.1151-2916.1997.tb02803.x
  19. Liao, S-C., Pae, K.D. and Mayo, W.E., 1997, 'Retention of Nanoscale Grain Size in Bulk Sintered Materials via a Pressure-Induced Phase Transformation,' Nanostructured Mat., Vol. 8, No. 6, pp. 645-656 https://doi.org/10.1016/S0965-9773(97)00227-4
  20. Liao, S-C., Mayo, W.E. and Pae, K.D., 1997, 'Theory of High Pressure/Low Temperature Sintering of Bulk Nanocrystalline $TiO_2$,' Acta. Mater., Vol. 45, No. 10, pp. 4027-4040 https://doi.org/10.1016/S1359-6454(97)00087-6
  21. Mishra, R.S., Lesher, C.E. and Mukherjee, AX, 1996, 'High-Pressure Sintering of Nanocrystalline ${\gamma}-Al_2O_3$,' J. Am. Ceram. Soc., Vol. 79, No. 11, pp. 2989-2992 https://doi.org/10.1111/j.1151-2916.1996.tb08741.x
  22. Averback, R.S., Hofler, H.J., Hahn, H. and Logas, J.C., 1992, 'Sintering and Grain Growth in Nanocrystalline Ceramics,' Nanostructured Mat., Vol. 1, pp. 173-178
  23. Shi, J.L., 1999, 'Relation between Coarsening and Densification in Solid-state Sintering of Ceramics: Model Analysis,' J. Mat. Res., Vol. 14, No. 4, pp. 1378-1388 https://doi.org/10.1557/JMR.1999.0188
  24. Chen, P.-L. and Chen, I.-W., 1996, 'Sintering of Fine Oxide Powders: II, Sintering Mechanisms,' J. Am. Ceram. Soc., Vol. 79, No. 12, pp. 3129-3141 https://doi.org/10.1111/j.1151-2916.1996.tb08087.x
  25. Casagranda, A. and Sofronis, P., 1997, 'Numerical Observations of Scaling Laws in the Consolidation of Powder Compacts,' Acta. Mater., Vol. 45, No. 11, pp. 4835-4845 https://doi.org/10.1016/S1359-6454(97)00088-8
  26. Gell, M., 1995, 'Application Opportunities for Nanostructured Materials and Coating,' Mat. Sci. and Engng. A204, pp. 246-251 https://doi.org/10.1016/0921-5093(95)09969-7
  27. Nordahl, S.C. and Messing, G.L., 1996, 'Transforamtion and Densification of Nanocrystalline ${\theta}$-Alumina during Sinter Forging,' J. Am. Ceram. Soc.. Vol. 79, No. 12, pp. 3149-3154 https://doi.org/10.1111/j.1151-2916.1996.tb08089.x
  28. Nair, P.K, Mizukami, F., Nair, J., Salou, M., Oosawa, Y., Izutsu, H., Maeda, K., and Okubo, T., 1998, 'Pore-Structure Stability of Nanostructured Rutile Titania Containing A 'Structure-Directing Second-Phase Stabilizer,' Mat. Res. Bull., Vol. 33, No. 10, pp. 1495-1502 https://doi.org/10.1016/S0025-5408(98)00146-9
  29. Rittner, M.N. and Abraham, T., 1997, 'The Nanostructured Materials Industry,' Am. Ceram. Soc. Bull., Vol. 76, No. 6, pp. 51-53
  30. Suryanarayana, C. 1995, 'Nanocrystalline Materials,' Int. Mater. Rev., Vol. 40, No. 2, pp. 41-64
  31. Verweij, H., 1998, 'Nanocrystalline and Nanoporous Ceramics,' Adv. Mater., Vol. 10, No. 17, pp. 1483-1486 https://doi.org/10.1002/(SICI)1521-4095(199812)10:17<1483::AID-ADMA1483>3.0.CO;2-J
  32. Mayo, M.J., 1996, 'Processing of Nanocrystalline Ceramics from Ultrafine Particles,' Int. Mater. Rev., Vol. 41, No. 3, pp. 85-115