사각 덕트 내부 열전달 향상을 위한 요철의 단락 효과

DOI QR코드

DOI QR Code

권혁진;우성제;조형희
Kwon, Hyuk-Jin;Wu, Seong-Je;Cho, Hyung-Hee

  • 발행 : 2000.05.01

초록

The influence of arrangement and length of discrete ribs on heat/mass transfer and friction loss is investigated. Mass transfer experiments are conducted to obtain the detailed local heat/mass transfer information on the ribbed wall. The aspect ratio (width/height) of the duct is 2.04 and the rib height is one tenth of the duct height, such that the ratio of the rib height to hydraulic diameter is 0.0743. The ratio of rib-to-rib distance to rib height is 10. The discrete ribs were made by dividing each continuous rib into 2, 3 or 5 pieces and attached periodically to the top and the bottom walls of the duct with a parallel orientation The combined effects of rib angle and length of the discrete ribs on heat/mass transfer ae considered for the rib angles $({\alpha})\;of\;90^{\circ}\;and\;45^{\circ}$. As the number of the discrete ribs increases, the uniformity of the heat/mass transfer distributions increases. For $(\alpha})=90^{\circ}$, the heat/mass transfer enhancement with the discrete ribs is remarkable, while the heat/mass transfer performances are slightly higher than that of the transverse continuous ribs due to the accompanied high friction loss penalty. For $(\alpha})=90^{\circ}$, the average heat/mass transfer coefficients and the heat/mass transfer performances decrease slightly with the discrete ribs compared to the case of the angled continuous ribs

키워드

요철;단락 요철;열/물질전달 촉진;성능계수;덕트 유동

참고문헌

  1. Chandra, P. R., Han, J. C. and Lau, S. C., 1988, 'Effect of Rib Angle on Local Heat/Mass Transfer Distribution in a Two-Pass Rib-Roughened Channel,' ASME J. of Turbomachinery, Vol. 110, pp. 233-241
  2. Han, J. C., Chandra, P. R., and Lau, S. C., 1988, 'Local Heat/Mass Transfer Distributions Around Sharp 180 deg. Turns in Two-Pass Smooth and Rib-Roughened Channels,' ASME J. Heat Transfer, Vol. 110, pp. 91-98
  3. Han, J. C., Ou, S., Park, J. S., and Lei, C. K., 1989, 'Augmented Heat Transfer in Rectangular Channels of Narrow Aspect Ratios with Rib Turbulators,' Int. J. of Heat Mass Transfer, Vol. 32, No. 9, pp. 1619-1630 https://doi.org/10.1016/0017-9310(89)90044-6
  4. Han, J. C. and Park, J. S., 1988, 'Developing Heat Transfer in Rectangular Channels With Rib Turbulators,' Int. J. of Heat Mass Transfer, Vol. 31, No. 1, pp. 183-195 https://doi.org/10.1016/0017-9310(88)90235-9
  5. Liou, T. M. and Hwang, J. J., 1993, 'Effect of Ridge Shapes on Turbulent Heat Transfer and Friction in a Rectangular Channel,' Int. J. of Heat Mass Transfer, Vol. 36, No. 4, pp. 931-940 https://doi.org/10.1016/S0017-9310(05)80277-7
  6. Taslim, M. E. and Spring, S. D., 1994, 'Effects of Turbulator Profile and Spacing on Heat Transfer and Friction in a Channel,' J. of Thermophysics and Heat Transfer, Vol. 8, No. 3, pp. 555-562
  7. 우성제, 김완식, 조형희, 1998, '사각 덕트내 요철의 각도 변화에 따른 열전달 특성', 대한기계학회논문집 B, 제22권, 제4호, pp. 530-541
  8. 우성제, 권혁진, 조형희, 1999, '터빈 기익 내부관 열전달 증대를 위해 설치된 요철의 형상 효과', 대한기계학회논문집 B, 제23권, 제1호, pp. 149-157
  9. Lau, S. C., McMillin, R. D. and Han, J. C., 1991b, 'Turbulent Heat Transfer and Friction in a Square Channel with Discrete Rib Turbulators,' ASME J. of Turbomachinery, Vol. 113, pp. 360-366
  10. Lau, S. C., McMillin, R. D. and Han, J. C., 1991c, 'Heat Transfer Characteristics of Turbulent Flow in a Square Channel with Angled Discrete Ribs,' ASME J. of Turbomachinery, Vol. 113, pp. 367-374
  11. Lau, S. C., Kukreja, R. T. and McMillin, R. D., 1992, 'Turbulent Heat Transfer in a Square Channel with Staggered Discrete Ribs,' J. of Thermophysics Heat Transfer, Vol. 6, No. 1, pp. 171-173
  12. Taslim, M. E., Li, T. and Kercher, D. M., 1996, 'Experimental Heat Transfer and Friction in Channels Roughened With Angled, V-Shaped, and Discrete Ribs on Two Opposite Walls,' ASME J. of Turbomachinery, Vol. 118, pp. 20-28
  13. Ekkad, S. V. and Han, J. C., 1997, 'Detailed Heat Transfer Distributions in Two-pass Square Channels with Rib Turbulators,' Int. J. of Heat Mass Transfer, Vol. 40, No. 11, pp. 2525-2537 https://doi.org/10.1016/S0017-9310(96)00318-3
  14. Chyu, M. K. and Natarajan, V., 1989, 'Local Heat Transfer on a Flat Surface Roughened with Broken Ribs,' ASME Winter Annual Meeting, San Francisco, CA, ASME-HTD, pp. 25-31
  15. Hu, Z. and Shen, J., 1996, 'Heat Transfer Enhancement in a Converging Passage with Discrete ribs,' Int. J. of Heat Mass Transfer, Vol. 39, No. 8, pp. 1719-1727 https://doi.org/10.1016/0017-9310(95)00199-9
  16. Ambrose, D., Lawrenson, I. J., and Sparke, C. H. S., 1975, 'The Vapor Pressure of Naphthalene,' J. of Chem. Thermodynam., Vol. 7, pp. 1173-1176
  17. Goldstein, R. J. and Cho, H. H. 1995, 'A Review of Mass Transfer Measurements Using Naphthalene Sublimation,' Experimental Thermal and Fluid Science, Vol. 10, pp. 416-434 https://doi.org/10.1016/0894-1777(94)00071-F
  18. Kline, S. J. and McClintock, F. A., 1953, 'Describing Uncertainty in Single-Sample Experiments,' Mechanical Engineering, Vol. 75, pp. 3-8
  19. McAdams, W. H., 1942, Heat Transmission, 2nd ed. McGraw-Hill, New York
  20. Petukhov, B. S., 1970, Advances in Heat Transfer, Vol. 6, Academic Press, New York, pp. 503-504
  21. Han, J. C. and Zhang, Y. M., 1992, 'High Performance Heat Transfer Ducts with Parallel Broken and V-shaped broken ribs,' Int. J. of Heat Mass Transfer, Vol. 35, pp. 513-523 https://doi.org/10.1016/0017-9310(92)90286-2