A Study of a New Precision Finishing Process for Inside Surface of Silicon Nitride Fine Ceramic Pipe by Application of Magnetic Abrasive Machining

자기 연마법에 의한 질화 규소계 세라믹 파이프 내면의 경면 연마 특성에 관한 연구

  • Published : 2001.01.01


Results ar presented of a new process for internal precision finishing of slender fine ceramic pipes using a magnetic field generated by a permanent magnets. For finishing the interior surface of a long pipe, a new type of finishing equipment was developed which can be very easily used in an industrial surrounding. In general, the pipe is so slender that a conventional finishing tool is hardly inserted into the pipe deeply, being impossible to finish. Therefore, a new technology has been considered to finish inside of a slender ceramic pipe by a simple technique. In this experimental, Magnetic Abrasive Machining is applied for the inner surface of silicon nitride fine ceramic pipe using ferromagnetic particles mixed with chromium-oxide powder. It is shown the initial roughness of 2.6㎛ Ry(0.42㎛ Ra) in the inside surface can be precisely finished to the roughness of 0.1㎛ Ry(0.01㎛ Ra). This paper discusses the outline of the processing by the application of magnetic abrasive machining and a few finishing characteristics.


Silicon Nitride Fine Ceramic Pipe;Magnetic Abrasive Machining;Precision Finishing


  1. 進村武男, 1996, '磁氣硏磨,' 機械技術, Vol. 44, No.1, pp. 49-60
  2. 進村武男, 會澤利夫, 1992, 磁氣硏磨法によるファインセラミックスの平滑加工-ダイアモンド磁性砥粒の開發とその硏磨性能,' 砥粒加工學會誌, Vol. 36, No. 2, pp. 91-99
  3. 進村武男, 王鳳輝, 會澤利夫, 1993, '磁氣硏磨法によるファインセラミックスの平滑加工に關する硏究-强磁性體粒子混合ダイアモンド磁性砥粒の硏磨能率向上效果,' 日本精密工學會誌, Vol. 59, No. 8, pp. 1251-1258
  4. 安永, 今中, 1974, 'メカノケミカル現象を應用した結晶材料の精密硏磨法.' セラミックス, Vol. 9, No. 4, pp. 21-28
  5. 進村武男, 山口人見, 1993, '精密硏磨法による內面の潤滑加工に關する硏究-ステンレス鋼圓管內面及びクリ-ンカスボンベ內面の精密硏磨,' 日本機械學會論文集(C 編), Vol. 59, No. 8, pp. 1261-1267
  6. 北鳴弘一, 車全浩, 鈴木淸, 植松哲太郞, 1994, 'ラツビグテ-プによるセラミックスのメカノケミカルポリシング,' 砥粒加工學會誌, Vol. 38, No. 3, pp. 159-165