DOI QR코드

DOI QR Code

Concurrent Optimization of Design and Machining Tolerances with Accumulated Scrap Cost Model(ASCM)

누적 재가공 비용 모델을 이용한 설계 및 가공 공차의 동시 최적화

  • Published : 2001.03.01

Abstract

Most of researches of tolerance optimization have used a simple sum of tolerance-cost functions with several constraint equations as an optimization model. However, if there is a machining sequence with more than one processes to complete a part, and machining failure, i.e., out-of-tolerance occurs at one of the intermediate processes, the tolerance-cost of this process should be added by the machining cost of all the previous processes already completed on the part. In this study, an accumulated scrap cost model(ASCM) is proposed considering the scrapped machining cost, and applied to a simple assembly example. The result of tolerance optimization using ASCM is compared with that of using a traditional optimization model to confirm its effectiveness.

Keywords

Tolerance;Design Optimization;Tolerance Design

References

  1. Schilling, R. J. and Harris, S. L., 2000, Applied Numerical Methods for Engineers Using MATLAB and C, Brooks/Cole, pp. 637-641
  2. Wei, C. C., 1997, 'Designing Process Tolerances to Minimize Loss of Nonconforming Parts,' Components, Hybrids, and Manufacturing Technology, Part C, IEEE Transactions on, Vol. 20, No. 4, pp. 312-316 https://doi.org/10.1109/3476.650963
  3. Creveling, C. M., 1997, Tolerance Design: A Handbook for Developing Optimal Specifications, Addison Wesley Longman, Inc., pp. 51-100
  4. 최진호, 이세정, 최동훈, '기구 시스템의 신뢰성을 고려한 공차최적설계,' 대한기계학회논문집(A), 제 23 권, 제 5 호, 1999, pp. 751-762
  5. Zhang, G., 1996, 'Simultaneous Tolerancing for Design and Manufacturing,' International Journal of Production Research, Vol. 34, No. 12, pp. 3361-3382 https://doi.org/10.1080/00207549608905095
  6. Al-Ansary, M. D. and Deiab, L. M., 1997, 'Concurrent Optimization of Design and Machining Tolerances Using the Genetic Algorithms Method,' International Journal of Machine Tools and Manufacture, Vol. 37, No. 12, pp. 1721-1731 https://doi.org/10.1016/S0890-6955(97)00033-3
  7. Zhang, G., Wang, H. P. and Li, J. K., 1992, 'Simultaneous Optimization of Design and Manufacturing-Tolerance with Process(Machine) Selection,' Annals of the CIRP, Vol. 41, No. 1, pp. 569-572
  8. Fraticelli, B. P., Lehtihet, E. A. and Cavalier, T. M., 1997, 'Sequential Tolerance Control in Discrete Parts Manufacturing,' International Journal of Production Research, Vol. 35, No. 5, pp. 1305-1319 https://doi.org/10.1080/002075497195335
  9. Dong, Z. and Hu, W., 1991, 'Optimal Process Sequence Identification and Optimal Process Tolerance Assignment in Computer-aided Process Planning,' Computer in Industry, Vol. 17, pp. 19-32 https://doi.org/10.1016/0166-3615(91)90100-N
  10. He, J. R., 1991, 'Tolerancing for Manufacturing via Cost Minimization,' International Journal of Machine Tools and Manufacturing, Vol. 31, No. 4, pp. 455-470 https://doi.org/10.1016/0890-6955(91)90029-3
  11. Fainguelernt, D., Weill, R. and Bourdet, P., 1986, 'Computer Aided Tolerancing and Dimensioning in Process Planning,' Annals of the CIRP, Vol. 35, No. 1, pp. 381-386
  12. Li, J. K. and Zhang, C., 1989, 'Operational Dimensions and Tolerances Calculation in CAPP Systems for Precision Manufacturing,' Annals of the CIRP, Vol. 38, No. 1, pp. 403-406
  13. Lee, J. and Johnson, G. E., 1993, 'Optimal Tolerance Allotment Using a Genetic Algorithm and Truncated Monte Carlo Simulation,' Computer-Aided Design, Vol. 25, No. 9, pp. 601-611 https://doi.org/10.1016/0010-4485(93)90075-Y
  14. Tang, G. R., Kung, R. and Chen, J. Y., 1994, 'Optimal Allocation of Process Tolerances and Stock Removals,' International Journal of Production Research, Vol. 32, No. 1, pp. 23-35 https://doi.org/10.1080/00207549408956913
  15. Spotts, M. F., 1973, 'Allocation of Tolerances to Minimize Cost of Assembly,' Trans. of the ASME, August, pp. 762-764
  16. Chase, K. W., Greenwood, W. H., Loosli, B. G. and Hauglund, L. F., 1990, 'Least Cost Allocation for Mechanical Assemblies with Automated Process Selection,' Manufacturing Review, Vol. 3, No. 1, pp. 49-59
  17. Roy, U. and Fang, Y. C., 1997, 'Optimal Tolerance Re-allocation for the Generative Process Sequence,' IIE Transactions, Vol. 29, pp. 37-44 https://doi.org/10.1080/07408179708966310
  18. Ashiagbor, A., Liu, H. C. and Nnaji, B. O., 1998, Tolerance Control and Propagation for the Product Assembly Modeler,' International Journal of Production Research, Vol. 36, No. 1 pp. 75-93 https://doi.org/10.1080/002075498193949
  19. Speckhart, F. H., 1972, 'Calculation of Tolerance Based on a Minimum Cost Approach,' Journal of Engineering for Industry, Trans. of the ASME, May, pp. 447-453
  20. Lin, C. Y., Huang, W. H., Jeng, M. C. and Doong, J. L., 1997, 'Study of an Assembly Tolerance Allocation Model Based on Monte Carlo Simulation,' Journal of Material Processing Technology, Vol. 70, pp. 9-16 https://doi.org/10.1016/S0924-0136(97)00034-4
  21. Chase, K. W. and Parkinson, A. R., 1991, 'A Survey of Research in the Application of Tolerance Analysis to the Design of Mechanical Assemblies,' Research in Engineering Design, Vol. 3, pp. 23-37 https://doi.org/10.1007/BF01580066
  22. Bjorke, O., 1989, Computer Aided Tolerancing, 2nd Ed., ASME Press