DOI QR코드

DOI QR Code

Prediction of Forming Limit Diagram Dependent on Strain History in Sheet Metal Forming

변형경로를 고려한 판재의 성형한계도 예측

  • Published : 2001.07.01

Abstract

The forming limit diagram introduced by Keeler and Goodwin has been used generally to analyze the formability of sheet metal. However, path dependent forming limit curves based on the state of strain can be explained only by a single criterion which is based on the state. In this study, experimental forming limits in strain space of some metal sheets are transformed into forming limit curves in stress space. Effects of yield criterion are investigated in transforming the forming limit curves. Some important design aspects which are based on the close prediction of movements in forming limit curves during sheet forming are concluded.

Keywords

Forming Limit Diagram;Forming Limit Stress Curve;Formability;Sheet Metal Forming

References

  1. Arrieux, R., 1997, 'Determination and Use of the Forming Limit Stress Surface of Orthotropic Sheets,' Journal of Materials Processing Technology, Vol. 64, pp. 25-32 https://doi.org/10.1016/S0924-0136(96)02550-2
  2. Vacher, P., Arrieux, R. and Tabourot, L., 1998, 'Analysis of a Criterion of Deep Drawing Operation Capability for Thin Orthotropic Sheets,' Journal of Materials Processing Technology, Vol. 78, pp. 190-197 https://doi.org/10.1016/S0924-0136(97)00486-X
  3. Keeler, S. P. and Back, W. A., 1963, 'Plastic Instability and Fracture in Sheets Stretched over Rigid Punches,' ASM Transactions Quarterly, 1963, pp. 25-48
  4. Goodwin, G. M., 1968, 'Application of Strain Analysis to Sheet Metal Forming Problems in the Press Shop,' Transactions Society of Automotive Engineering, No. 680093. pp. 380-387
  5. 김영석, 1993, '판재의 성형성평가 실험에 대한 고찰,' 대한기계학회지, 제33권, 제1호(통권 제146호), pp. 47-65
  6. Kleemola, H. J. and Pelkkikangas, M. T., 1977, 'Effect of Predeformation and Strain Path on Forming Limits of Steel Copper and Brass,' Sheet Metal Industries, pp. 591-599
  7. 양동렬, 1984, '금속성형 의 기초 와 응용 I,' 대한기계학회지, 제24권, 제2호(통권 제84호), pp. 83-91
  8. Stoughton., T. B., 2000, 'A General Forming Limit Criterion for Sheet Metal Forming, International Journal of Mechanical Sciences, Vol. 42, pp. 1-27 https://doi.org/10.1016/S0020-7403(98)00113-1
  9. Nam, J. B., Park, K. C. and Jeong, K. J., 1997, 'Determination of Forming Limit Curves of Steel Sheets with Considering the Effect of Strain-Path Changes,' Journal of the Korean Society for Technology of Plasticity, Vol. 6, No. 1, pp. 36 -45
  10. Hosford, W. F., 1979, 'On Yield Loci of Anisotropic Cubic Metals,' Proc. 7th NAMRC, SME, Dearborn, Michigan, pp 191-196
  11. Hill, R., 1948, 'A Theory of the Yielding and Plastic Flow of Anisotropic Metals,' Proceedings of the Royal Society of London, pp. 281-297
  12. Graf, A. F., and Hosford, W. F., 1993, 'Calculations of Forming Limit Diagram for Changing Strain Paths,' Metallurgical Transactions A, Vol. 24A, pp. 2497-2501 https://doi.org/10.1007/BF02646528