DOI QR코드

DOI QR Code

Study on Scratch Defect of Roll Forming Process

롤포밍공정에서의 스크래치 결함에 대한 연구

  • Published : 2001.08.01

Abstract

In this paper, modeling of the multi-pass roll forming process with the finite element method and defect prediction in roll forming process are presented. In the roll forming process, there occurs the defect of scratch. It appears on tubes because of the friction between the strip and the roll, the unexpected sliding velocity and the contact pressure when fabricating the tubes. The surface of the product will be not uniform due to the defect. The scratch can be predicted with the simulation modeling of the finite element method, and can be avoided by modifying the design.

Keywords

Roll Forming;Rigid plastic Finite Element Method;Forming Length;W-Bend Forming;Scratch

References

  1. 홍석무, 조현중, 김남수, 1999, '롤포밍 공정의 강소성 유한요소 모델링,' 동역학 및 제어부분-생산 및 설계부분 공동학술 대회 논문집, pp. 287-293
  2. 홍석무, 김두수, 윤환진, 김낙수, 2000, '롤포밍 시뮬레이션 프로그램 개발,' 한국 CAD/CAM 학회 학술 발표회 논문집, pp. 417-423
  3. Sukmoo Hong, Seungyoon Lee, Naksoo Kim, 2001(예정),' A Parametric study on forming length in the roll forming,' The 5th Asia Pacific Conference on Material Processing
  4. Kiuchi, M., 1973, 'Analytical study on cold roll forming process,' Report of the Inst. of Ind. Sci., Univ. of Tokyo, Vol. 23, pp. 1-23
  5. Kiuchi, M. and Koudobashi, T., 1984, 'Automated Design System of Optimum Roll Profiles for Cold Roll Forming,' Proc. 3rd Int. Conf. on Rotary Metal Working Process, Kyoto, pp. 423-427
  6. Bhattacharyya, D., Panton, S. M., 1990, 'Production of Strain development while Roll Forming Fundamental Sections,' Advanced Technology of Plasticity, Vol. 2, pp. 464-470
  7. Bhattacharyya, D., Smith, P. D., Yee, C. H., and Collins, I. F., 1984, 'The Prediction of Deformation length in Cold Roll Forming,' J. Mech. Working Technol., Vol. 9, pp. 181-191 https://doi.org/10.1016/0378-3804(84)90004-4
  8. Jimma, T. and Ona, H., 1980, 'Optimum Roll Pass Schedules on the Cold Roll Forming Process of Symmertrical Channels, Proc. 21st Int. M.T.D.R. Conf., pp. 63-67
  9. Ona, H., Jimma, T., and Fukoya, N., 1983, 'Experiments into the Roll Forming of Straight Asymmetrical Channels,' J. Mech. Working Technol., Vol. 8, pp. 273-278 https://doi.org/10.1016/0378-3804(83)90012-8
  10. Ona, H., Jimma, T., and Kozono, H., 1984, 'A Computer-Aided System for Cold Roll foming,' Advanced Technology of Plasticity, Vol. 1, pp. 508-514
  11. Kobayashi, S.,Oh, S.-I. and Altan, T., 1989, Metal Forming And The Finite Element Method. Oxford University Press, pp. 73-130
  12. Kim, N. and Oh, S.-I., 1999, 'Analysis Tool for Roll Forming of Sheet Metal Strips by The Finite Elements Method,' Annals of the C.I.R.P, Vol. 48, pp. 235-238 https://doi.org/10.1016/S0007-8506(07)63173-4
  13. 홍석무, 김낙수, 1999, '3차원 유한요소법에 의한 롤포밍 공정 해석 시뮬레이션,' 한국소성가공학회 춘계학술대회 논문집, pp. 207-212