Analysis and Reduction Methods of Sheath Circulating Current in Underground Transmission Systems

지중송전계통에서 시스순환전류 해석 및 저감방안

  • Published : 2001.11.01

Abstract

This paper describes the analysis of sheath circulating current and various methods to reduce the large circulating current in case of operating cable system using EMTP/ATPDraw. And also, possible methods are proposed through a detailed analysis regarding cable systems by considering various electrical and environmental factors. It is evaluated that the proposed reduction methods can be effectively applied to reduce the large sheath circulating over current with the minimized electrical problems.

References

  1. 한국전력공사, '지중송전 실무 I,II', 1996
  2. 전력연구원, '지중송전계통의 접지기술 정립에 관한 연구', 1998.1
  3. IEEE, 'IEEE Guide for the application of sheath-bonding Methods for single-conductor cables and calculation of induced voltages and currents in cable sheaths, ANSI/IEEE Std 575-1988
  4. J.S.Barrett, G.J.Anders, 'Circulating current and hysterisis losses in screens, sheaths, and armour of electric power cables - mathematical models and comparison with IEC Standard 287
  5. M.G. Dwek, M.N. Eggleton, 'Electric parameters of 400kV and 257kV cables used in England and Wales'
  6. 한국전력공사 기술연구원, '전력계통 과도해석 프로그램 이론 및 활용에 관한 연구', 1991
  7. 한국전력공사 기술연구원, '지중선 임피던스 및 허용전류 계산기법 연구', 1991
  8. Turan Gonen, 'Electric power transmission system engineering', John Wiley & Sons