코일형 나선 전열관의 내부 응축열전달 특성에 관한 실험 적 연구

DOI QR코드

DOI QR Code

박종운;권영철;한규일
Park, Jong-Un;Gwon, Yeong-Cheol;Han, Gyu-Il

  • 발행 : 2001.12.01

초록

An experimental study on condensation heat transfer characteristics of helically coiled spiral tubes was performed. The refrigerant is R-113. A refrigerant loop was established to measure the condensation heat transfer coefficients. Experiments were carried out uniform heat flux of 15 kw/m$^2$, refrigerant quality of 0.1∼0.9, curvature ratio of 0.016, 0.025 and 0.045. The curvature of a coil was defined as the ratio of the inside diameter of the tube to the diameter of the bending circle. To compare the condensation heat transfer coefficients of coiled spiral tubes, the previous results on coiled plain tubes and straight plain tubes were used. The results shows that the condensation heat transfer coefficients of coiled spiral tubes largely increase, as increasing Re and quality, compared to those of coiled plain tubes and straight plain tubes. As increasing degree of subcooling, however, the condensation heat transfer coefficients on coiled spiral tubes decrease. It is found that the heat transfer enhancement is more better than coiled plain tubes and straight plain tubes, as increasing curvature ratio.

키워드

응축열전달;코일형 나선관;균일열유속;곡률비

참고문헌

  1. Mori, Y. and Nakayama, W ... 1967, 'Study on forced convective heat transfer in curved pipes (2st report, turbulent region),' Int. J Heat Mass Transfer, Vol. 10, pp. 37-59 https://doi.org/10.1016/0017-9310(67)90182-2
  2. Akers, W. W., Deans. H, A. and Crosser, O. K., 1958, 'Condensing heat transfer with horizontal tubes,' Chem. Eng. Prog. Symp. Ser., Vol. 55, No. 29, p. 171-177
  3. Ito, H., 1959, 'Friction factors for Turbulent flow in curved pipes,' J Bas. Engng., D81, pp. 123-133
  4. Pratt, N. H., 1947, 'The heat transfer in a reaction tank cooled by means of a coil,' Trans. Instn Chem Engrs., Vol. 25, pp. 163-180
  5. Rogers, G.F.C., Mayhew, Y.R., 1964, 'Heat Transfer and Pressure Loss in Helically Coiled Tubes with Turbulent Flow,' Int. J Heat Transfer, Vol. 7, pp. 1207-1216 https://doi.org/10.1016/0017-9310(64)90062-6
  6. Srinivasan, S., Nandapurkar, S. S. and Holland, F. A., 1968, 'Pressure drop and heat transfer in coils,' Chem. Engr., No. 218, pp. 113-119
  7. Janssen, L. A. M. and Hoogendoom, C. J., 1978, 'Laminar convective heat transfer in helical coiled tubes,' Int. J Heat Mass Transfer, Vol. 21, pp. 1197-1206 https://doi.org/10.1016/0017-9310(78)90138-2
  8. Dravid, A. N., Smith., K. A., Merrill, W. and Brian. P. L. T., 1971, 'Effect of secondary fluid motion on laminar flow heat transfer in helically coiled tubes,' AIChE Journal, Vol 17, pp. 1114-1122 https://doi.org/10.1002/aic.690170517
  9. Seban, R. A. and McLaughlin, E. F., 1963, 'Heat transfer in tube coils with laminar and turbulent flow,' Int. J Heat Mass Transfer, Vol. 6, pp. 387 - 395 https://doi.org/10.1016/0017-9310(63)90100-5
  10. 노건상, 오후규, 1999, '수평 평활관 및 전열 촉진관내 대체 냉매 R-407C의 웅축 열전달 특성에 관한 연구,' 대한기계학회논문집 B권, 제23권, 제2호, pp. 210-217
  11. Mori, Y. and Nakayama, W., 1965, 'Study on forced convective heat transfer ill curved pipes (1st report, laminar region),' Int. J Heat Mass Transfer, Vol. 8, pp. 67-82 https://doi.org/10.1016/0017-9310(65)90098-0
  12. Kalb, C. E., and Seader, J. D., 1974, 'Fully developed viscous-flow heat transfer in curved circular tubes with uniform wall temperature,' AIChE Journal, Vol. 20, No.2, pp. 340 - 346 https://doi.org/10.1002/aic.690200220
  13. Webb, R. L. and Murawski, C. G.,1990, 'Row effect for R-11 condensation on enhanced tubes,' Tran. of the ASME, Vol. 112, pp. 768-776