DOI QR코드

DOI QR Code

AE 기법을 이용한 TiNi/A16061 형상기억복합재료의 파괴특성평가

Fracture Characteristic of TiNi/A16061 Share Memory Alloy Composite using Acoustic Emission Technique

  • 이진경 (동의대학교 기계공학과) ;
  • 박영철 (동의대학교 기계공학과) ;
  • 구후택 (동아대학교 대학원) ;
  • 박동성 (동아대학교 대학원) ;
  • 이규창 (산업과학연구원 신뢰성 평가센타)
  • 발행 : 2002.02.01

초록

Tensile residual stress happen by difference of coefficients of thermal expansion between fiber and matrix is one of the serious problems in metal matrix composite(MMC). In this study, TiNi fiber was used to solve the tensile residual stress as the reinforced material. TiNi fiber improves the tensile strength of composite by occurring compressive residual stress in matrix using shape memory effect of it. Pre-strain was added to generate compressive residual stress inside TiNi/A16061 composite. It was also evaluated the effect of compressive residual stress corresponding to pre-strains variation. AE technique was used to clarify the microscopic damage behavior at high temperature and the effect of pre-strain difference of TiNi/A16061 shape memory alloy composite.

참고문헌

  1. Lee, J. K., Lee, J. H. and Jeong, S. R., 2000, 'A Study on Microscopic Damage Behavior of Carbon Fiber Sheet Reinforced Concrete using Acoustic Emission Technique,' Proc. of the 2-Asia-Australasian Conference on Composite Materials, Vol. II, pp. 781-786
  2. Bukkapatnam S.T.S., Kumara S.R.T., Lakhtakia A., 1999, 'Analysis of Acoustic Emission Signals Machining,' J. of Manufacturing Science & Engineering, Vol. 121, No. 4, pp. 568-576 https://doi.org/10.1115/1.2833058
  3. Okafor, A. C. and Birdsong, S. R., 1999, 'Monitoring Drillign of Advanced Composites, Drill Wear and Exit Hole Delamination using Wave-Based Acoustic Emission,' Proc. of the Process Control and Sensors for Manufacturing II, pp. 115-124 https://doi.org/10.1117/12.339964
  4. Okafor, A. C., Otieno, A. W., Rao, V. S. and Rarvataneni. R., 1999, 'Detection and Characterization of Damage in composite plates using Shearography and Wave-based Acousitc Emission Techniques,' Proceedings of SPIE Smart Structures and Materials, pp. 427-437 https://doi.org/10.1117/12.349757
  5. Liu, H.K., Dai, W.L. and Lee, Y.C., 2000, 'Moisture Effects and Acoustic Emission Characterization on Lap Shear Strength in Ultrasonic Welded Carbon/nylon Composites,' Journal of Materials Science, Vol. 35, No. 13, pp. 3389-3396 https://doi.org/10.1023/A:1004837119725
  6. Logsdon, W. A. and Liaw, P. K., 1986, 'Tensile, Fracture Toughness and Fatigue Crack Growth Rate Properties of Silicon Carbide Whisker and Particulate Reinforced Aluminum Metal Matrix Composite,' Engineering Fracture Mechanics, Vol. 24, No. 5, pp. 737-751 https://doi.org/10.1016/0013-7944(86)90246-8
  7. 권재도, 안정주, 문윤배, 1996, '제적비가 SiCp/Al 복합재료의 기계적 및 피로균열진전 특성에 미치는 영향,' 대한기계학회논문집 A, 제20권 제4호, pp. 1301-1308
  8. Yuanti Huang, Gueping Y and Ping He, 1985, 'The Investigation of Internal Friction Electric Resistance and Shape Change in TiNi Alloy During Phase Transformations,' Scripta Metallurgica, Vol. 19, pp. 1033-1038 https://doi.org/10.1016/0036-9748(85)90004-3
  9. 김영식, 박환수, 1999, 'Ti-Ni계 형상기억합금화이어의 회전굽힘피로 특성,' 대한기계학회논문집 A, 제23권 제3호, pp. 490-496
  10. Liu, M., Zhang, X.M., Liu, L., Li, Y.Y. and Shelyakov, A.V., 2000, 'In Situ TEM Observations of Martensite-Austenite Transformations in a Ni49Ti36Hf15 High Temperature Shape Memory Alloy,' J. of Materials Science Letters, Vol. 19, No. 15, pp. 1383-1386 https://doi.org/10.1023/A:1006717619342
  11. Prahlad, H. and Chopra, I., 1999, 'Experimental Characterization of Ni-Ti Shape Memory Alloy Wires under Complex Loading Conditions,' Smart Structures and Materials 1999: Smart Structures and Integrated Systems, pp. 604-616 https://doi.org/10.1117/12.350736
  12. 정태헌, 이동주, 1999, '전단지연 이론을 이용한 단섬유 형태의 SMA 보강 고분자 복합재료의 열변형 거동해석,' 대한기계학회논문집 A, 제23권 제6호, pp. 1001-1010
  13. Yano, T., Budiyanto, K., Yoshida, K. and Iseki, T., 1998, Fabrication of Silicon Carbide Fiber-Reinforced Silicon Carbide Composite by Hot-Pressing,' Fusion Engineering &Design, Vol. 41, pp. 157-163 https://doi.org/10.1016/S0920-3796(98)00094-5