# Solidification Analysis for Surface Defect Prediction of Rheology Forming Process Considering Flow Phenomena of Liquid and Solid Region

• 서판기 (부산대학교 대학원 정밀기계공학과) ;
• 정영진 (부산대학교 대학원 정밀기계공학과) ;
• 강충길 (부산대학교 기계공학부)
• 발행 : 2002.10.01
• 73 6

#### 초록

Two-dimensional solidification analysis during rheology forming process of semi-solid aluminum alloy has been studied. Two-phase flow model to investigate the velocity field and temperature distribution is proposed. The proposed mathematical model is applied to the die shape of the two types. To calculate the velocities and temperature fields during rheology forming process, the each governing equations correspondent to the liquid and solid region are adapted. Therefore, each numerical model considering the solid and liquid coexisting region within the semi-solid material have been developed to predict the defects of rheology forming parts. The Arbitrary Boundary Maker And Cell(ABMAC) method is employed to solve the two-Phase flow model of the Navier-Stokes equation. Theoretical model basis of the two-phase flow model is the mixture rule of solid and liquid phases. This approach is based on using the liquid and solid viscosity. The Liquid viscosity is pure liquid state value, however solid viscosity is considered as a function of the shear rate, solid fraction and power law curves.

#### 키워드

반용응재료;이상유동;액상편석;반용융단조

#### 참고문헌

1. Kang, C. G., 1998, 'Effect of Gate Shape and Forging Temperature on the Mechanical Properties in the Injection Forging Process Semi-Solid Aluminum Material,' J. of Materials Processing Technology, Vol. 73/1-3, pp. 251-263 https://doi.org/10.1016/S0924-0136(97)00234-3
2. Garat, M., Blais, S., Pluchon, C. and Loue, W. R., 1998, 'Aluminum Semi-Solid Processing : from the Billet to the Finished Part,' The 5th Int. Conf. on Semi-Solid Processing of Alloys and Composites, pp. xvii-xxxi
3. Kang, C. G., Kang, B. S. and Kim, K. H., 1999, 'The Effect of Strain Rate on Macroscopic Behavior in Compression Forming of Semi-Solid Aluminum Alloy,' J. of Materials Processing Technology, Vol. 88, pp. 159-168 https://doi.org/10.1016/S0924-0136(98)00383-5
4. Harlow, F. H. and Welch, E. J., 1965, 'Numerical Calculation of Time-Dependent Viscous Incompressible Flow of Fluid with Free Surface,' The Physics of Fluid, Vol. 8, No. 12, pp. 2182-2189 https://doi.org/10.1063/1.1761178
5. Ohnaka, I., 1985, 'Introduction of Compute Heat and Solidification Analysis,' MARUZEN, pp. 167-208
6. 1990, Metal Handbook, ASM International, 10th Edition, Vol. 2, pp. 2 - 164
7. Jung, H. K. and Kang, C. G., 1999, 'An Induction Heating Process with Coil Design and Solutions Avoiding Coarsening Phenomena of AI-6 Pct Si-3 Pct Cu-0.3 Pct Mg Alloy for Thixoforming,' Metallurgical and Materials Transactions A, Vol. 30, No. 11, pp. 2967-2977 https://doi.org/10.1007/s11661-999-0134-5
8. Jung, H. K., Kang, C. G. and Moon, Y. H., 2000, 'Induction Heating of Semi-Solid Billet and Control of Globular Microstructure to Prevent Coarsening Phenomena,' J. of Materials Processing Technology, Vol. 9, No.1, pp. 12 -23 https://doi.org/10.1361/105994900770346222
9. Kang, C. G. and Kang, D. W., 1997, 'The Effect of Forging Process of Semi-Solid Aluminum Material on Mechanical Properties,' Transaction of The Korean Society of Mechanical Engineers A, Vol. 21, No.9, pp. 1400-1413
10. Kurz, W. and Fisher, D. J., 1984, Fundamentals of Solidification, Trans Tech Publication
11. Kim, N. S. and Kang, C. G., 2000, 'An Investigation of Flow Characteristics Considering Effect of Viscosity Variation in Thixoforming Process,' J. of Materials Processing Technology, Vol. 103, pp. 237-246 https://doi.org/10.1016/S0924-0136(99)00441-0
12. Kang, C. G. and Yoon, J. H., 1996, 'A Compression Behavior of Semi-Solid Material and Finite Element Analysis Considering Flow of Liquid Phase,' Transaction of The Korean Society of Mechanical Engineers A, Vol. 20, No. 12, pp. 3715-3727
13. Kang, C. G., Choi, J. S. and Kang, D. W., 1998, 'A Filling Analysis of the Forging Process of Semi-Solid Aluminum Materials Considering Solidification Phenomena,' J. of Materials Processing Technology, Vol. 30, No. 438, pp. 289-302 https://doi.org/10.1016/S0924-0136(97)00240-9
14. Koc, M., Vazquez, V., Witulski, T. and Altan, T., 1996, 'Application of the Finite Element Method to Predict Material Flow and Defects in the Semi-Solid Forging of A356 Aluminum Alloys,' J of Materials Processing Technology, Vol. 59, pp. 106-112 https://doi.org/10.1016/0924-0136(96)02291-1
15. Paradies, C. J., Rappaz, M., Imwinkelried, T. and Gabathuler, J. P., 1996, 'Simulation of the Pressure Die Casting of A Thixotropic Aluminum Alloy,' The 4th Int. Conf. on Semi-Solid Processing of Alloys and Composites, pp. 115-119
16. Burgos, G. R. and Alexandrou, A. N., 1998, 'Two-Phase Model of Flow of Semi-Solid Materials,' The 5th Int. Conf. on Semi-Solid Processing of Alloy and Composites, pp. 217-224
17. Modigell, M. and Koke, J., 1998, 'Two-Phase Model for Metal Alloys in the Semi-Solid State,' The 5th Int. Conf. on Semi-Solid Processing of Alloy and Composites, pp. 317-326
18. Kang, C. G. and Kim, Y. D., 1997, 'A Finite Element Analysis on the Upsetting Process of Semi-Solid Aluminum Material,' J. of Materials Processing Technology, Vol. 66/1-3, pp. 76-84 https://doi.org/10.1016/S0924-0136(96)02498-3
19. Pitts, H. E., and Atkinson, H. V., 1998, 'Thixforming of 6061 Al Alloy for Automotive Components,' The 5th Int. Conf. on Semi-Solid Processing of Alloys and Composites, pp. 97 - 104
20. Mullins, A. M. and Walker, D. J., 1996, 'Modelling Solid/Fluid Interactions in A Dendritic Semi Solid,' The 4th Int. Conf. on Semi-Solid Processing of Alloys and Composites, pp. 104-109
21. Barkhudarov, M. R., Bronisz, C. L. and Hirt, C. W., 1996, 'Three-Dimensional Thixotropic Flow Model,' The 4th Int. Conf. on Semi-Solid Processing of Alloys and Composites, pp. 110-114
22. Flemings, M. C., 1991, 'Behavior of Matal Alloys in the Semi-Solid State,' Metallurgical Transaction A, Vol. 22, pp. 957 - 981 https://doi.org/10.1007/BF02661090
23. J. of Materials Processing Technology v.73/1-3 Effect of Gate Shape and Forging Temperature on the Mechanical Properties in the Injection Forging Process Semi-Solid Aluminum Material Kang, C. G.