DOI QR코드

DOI QR Code

Shear Behavior Prediction of Reinforced Concrete Beams by Transformation Angle Truss Model Considered Bending Moment Effect

휨모멘트 효과가 고려된 변환각 트러스 모델에 의한 철근콘크리트 보의 전단거동 예측

  • Published : 2002.12.01

Abstract

For the prediction of shear behavior of reinforced concrete beams, this paper proposed Transformation Angle Truss Model (TATM) considered bending moment effect. Shear stress-strain relationship obtained from the TATM was agreed well with test results conducted by this study Further, shear strength obtained from the TATM was compared to the experimentally observed results of 170 reinforced concrete beams which had various shear span ratios shapes of support and shapes of cross section. The shear strength of reinforced concrete beams obtained from test was better predicted by the TATM with 0.96 in average and 11.9% in coefficient of variation than by other truss models. And the ratio of experimental results to theoretical results obtained from the TATM was almost constant regardless of the η and a/d.

References

  1. T. T. C. Hsu, "Nonlinear Analysis of Concrete Membrane Elements," ACI Structural Journal, Vol. 88, No. 5, Sep.-Oct. 1991, pp.552-561.
  2. A. H. Mattock and Z. Wang, "Shear Strength of Reinforced Concrete Members Subject to High Axial Compressive Stress," ACI Structural Journal, Vol. 81, No.3, May-June 1984, pp.287-298.
  3. A. Placas and P. E. Regan, "Shear Failure of Reinforced Concrete Beams," ACI Journal, Proceedings Vol. 68, No. 10, Oct. 1971, pp.763-773.
  4. M. J. Haddadin, S.-T. Hong, and A. H. Mattock, "Stirrup Effectiveness in Reinforced Concrete Beams with Axial Force," Proceedings, ASCE, Vol. 97, No. ST9, Sep. 1971, pp.2277-2297.
  5. J. J. Rodriguez, A. C. Bianchini, I. M. Viest, and C. E. Kesler, "Shear Strength of Two-Span Continuous Reinforced Concrete Beams," ACI Journal, Proceedings Vol. 55, No. 10, Apr. 1959, pp.1089-1130.
  6. R. R. H. Zhu, T. T. C. Hsu, and J. -Y. Lee, "Rational Shear Modulus for Smeared Crack Analysis of Reinforced Concrete," ACI Structural Journal, Vol. 98, No.4, July-Aug. 2001, pp.443-450.
  7. P. Y. L. Kong and B. V. Rangan, "Shear Strength of High-Performance Concrete Beams," ACI Structural Journal, Vol. 95, No. 6, Nov.-Dec. 1998, pp.677-688.
  8. E. G. Nawy, "Prestressed Concrete :A Fundamental Approach," 2nd ed., Prentice Hall, Inc., Upper Saddle River, New Jersey, 1996, 789pp.
  9. F. Watanabe and J.-Y. Lee, "Theoretical Prediction of Shear Strength and Ductility of Reinforced Concrete Beams," ACI Structural Journal, Vol. 95, No.6, Nov.-Dec. 1998, pp.749-757.
  10. T. T. C. Hsu, "Softened Truss Model Theory for Shear and Torsion," ACI Structural Journal, Vol. 85, No.6, Nov.-Dec. 1988, pp.624-635.
  11. 이정윤, "고정각 연화 트러스 모델의 적용 한계에 대한 연구," 한국콘크리트학회논문집, 제12권 5호, 2000. 10, pp.81-92.
  12. M. Fukuhara and S. Kokusho, "Effectiveness of High Tension Shear Reinforcement in Reinforced Concrete Members," Journal of the Structural Construction Engineering, AIJ, No. 320, Oct. 1982, pp.12-20.
  13. B. Li, K. Maekawa, and H. Okamura, "Contact Density Model for Stress Transfer Across Cracks in Concrete," Journal of the Faculty of Engineering, Vol. 40, No.1, 1989, pp.9-52.
  14. T. T. C. Hsu and L. X. Zhang, "Nonlinear Analysis of Membrane Elements by Fixed-Angle Softened- Truss Model," ACI Structural Journal, Vol. 97, No. 5, Sep.-Oct. 1997, pp.483-492.
  15. S. A. Guralnick, "High-Strength Deformed Steel Bars for Concrete Reinforcement," ACI Journal, Proceedings Vol. 57, No.3, Sep. 1960, pp.241-282.
  16. A. P. Clark, "Diagonal Tension in Reinforced Concrete Beams," ACI Journal, Proceedings Vol. 48, No. 2, Oct. 1951, pp.145-156.
  17. 김상우, 이정윤, "변환각 트러스 모델에 의한 철근콘크리 보의 전단거동 예측에 관한 연구," 한국콘크리트학회논문집, 제13권 2호, 2001. 4, pp. 130-138.
  18. Y. Matsuzaki, K. Nakano, M. Iso, and H. Watanabe, "Experimental Study on the Shear Characteristic of RC Beams with High Tension Shear Reinforcement," Proceedings, JCI, Vol. 12, No. 2, 1990, pp.325-328.
  19. O. Moretto, "An Investigation of the Strength of Welded Stirrups in Reinforced Concrete Beams," ACI Journal, Proceedings Vol. 42, No. 2, Nov. 1945, pp. 141-162.
  20. X. B. Pang and T. T. C. Hsu, "Fixed Angle Softened Truss Model for Reinforced Concrete," ACI Structural Journal, Vol. 93, No. 2, Mar. - Apr. 1996, pp.197-207.
  21. N. Nishiura, E. Makitani, and K. Shindou, "Shear Resistance of Concrete Beams with High Strength Web Reinforcements," Proceedings, JCI, Vol. 15, No. 2, 1993, pp.461-466.
  22. F. J. Vecchio and M. P. Collins, "The Modified Compression-Field Theory for Reinforced Concrete Elements Subjected to Shear," ACI Structural Journal, Vol. 83, No.2, Mar.-Apr .1986, pp.219-231.
  23. H. Takagi, H. Okude, and T. Nitta, "Shear Strength of Beam Depending the Strength of Web Reinforcements," Proceedings, JCI, Vol.11, No. 2, 1989, pp.75-80.
  24. R. C. Elstner, K. G. Moody, I. M. Viest, and E. Hognestad, "Shear Strength of Reinforced Concrete Beams. Part3 - Tests of Restrained Beams with Web Reinforcement," ACI Journal, Proceedings Vol. 51, No. 6, Feb. 1955, pp.525-539.
  25. M. P. Collins and D. Mitchell, "Prestressed Concrete Structures," Prentice Hall, Inc., Englewood Cliffs, New Jersey, 1991, 766 pp.
  26. S. Kokusho, K. Kobayashe, S. Mitsugi, and H. Kumagai, "Ultimate Shear Strength of RC Beams with High Tension Shear Reinforcement and High Strength Concrete," Journal of the Structural Construction Engineering, AIJ, No. 373, Mar. 1987, pp.83-91.

Cited by

  1. Nonlinear Analysis of Shear-Critical Reinforced Concrete Beams Using Fixed Angle Theory vol.137, pp.10, 2011, https://doi.org/10.1061/(ASCE)ST.1943-541X.0000345