Nonlinear Analysis and Design of Rectangular Damper

직사각형 댐퍼의 비선형 해석 및 설계

  • Received : 2003.05.09
  • Accepted : 2003.06.05
  • Published : 2003.08.27


In this study, the proper shape of dampers was determined when the outside frame formed a rectangle. The proper shape of dampers is rectangular, having the same ratio as the outside frame. The design was based on the impact energy dissipated by the seismic performance of the mainly rectangular dampers. This study sought to compare both strength and energy dissipation between nonlinear analysis data and experimental data through load-displacement curves. The use of the ANSYS FEM software was suggested to analyze the nonlinear behavior of rectangular dampers subjected to cyclic loading. The target of this study was to determine what shape was efficient for rectangular tensile brace dampers. The safety of the developed rectangular dampers was also checked for better fabrication.


Supported by : 중소기업청


  1. 강구조 한계상태 설계기준 및 해설 대한건축학회
  2. 한계상태설계기준에 의한 강구조설계 예제집 대한건축학회
  3. 대한건축학회지 v.32 no.2 철골구조의 내진성능 이명재
  4. ANSYS Manual Release 5.3
  5. POS-MIDAS GENw 4.2.2 Manual
  6. Seismic Provisions for Strutural Steel Building AISC
  7. Ductile Design of Steel Structures Bruneau, Michel
  8. Design of Earthquake-Resistant Buildings Wakabayashi, Minoru
  9. Engineering Journal, Third Quarter v.38 no.3 Seismic Behavior and Design of Concentrically Braced Steel Frames Trembly, Robert
  10. Seismic-Response Analysis And Design of Composite Building Structures Kim, Won-Ki