Synthesis of Nano-sized NiCuZn-ferrites for Chip Inductor and Properties with Calcination Temperature

칩인덕터용 NiCuZn-ferrites 나노 분말합성 및 하소 온도에 따른 특성 변화

  • 허은광 (서울시립대학교 신소재공학과) ;
  • 김정식 (서울시립대학교 신소재공학과)
  • Published : 2003.01.01


In this study, nano-sized NiCuZn-ferrites for the multi-layered chip inductor application were prepared by a coprecipitation method and its electromagnetic properties were analyzed. Also, the property of low temperature sintering were studied with the initial heat treatment of powder.$(Ni_{0.4-x}Cu_xZn_{0.60})_{1+w}(Fe_2O_4)_{1-w}$ (x=0.2, w=0.03) were calcined at $300^{circ}C~750^{circ}C.$ The sintered NiCuZn-ferrites at $900^{\circ}C$ showed good apparent density $4.90g/cm^3,$ and magnetic properties of initial permeability 164 and quality factor 72. As the calcination temperature increase, the grain size of NiCuZn-ferrite increased with irregular grain distribution and its magnetic properties were deteriorated.


  1. J. Kor. Ceram. Soc. v.34 no.10 A Study on Properties of Low Temperature Sintering in the NiZn Ferrite System S. K. Ko;B. H. Kim;K. Y. Kim
  2. J. Kor. Ceram. Soc. v.36 no.3 Property Changes of Chip Inductors by Varying the Solid Loading of Ferrite Pastes S. H. Son;H. J. Je;B. H. Kim
  3. IEEE Trans. Magn. v.30 no.6 Fine Powder Ferrite for Multilayer Chip Inductor H. M. Sung;C. J. Chen;L. J. Wang;W. S. Ko;H. C. Lin
  4. J. Mater. Chem. v.7 no.12 Nanophase Ferrites for CO₂Greenhouse Gas Decomposition S. Komarneni;M. Tsuji;Y. Wada;T. Yamamomo
  5. J. Am. Ceram. Soc. v.53 no.9 Nikel-Zinc Ferrites : I, Effect of Composition on the Magnetic Properties of a Nikel-Zinc-(Cobalt) Ferrite F. G. Brockman;K. E. Matteson
  6. J. Am. Ceram. Soc. v.60 no.1-2 Effects of Porosity and Grain Size on the Magnetic Properties of Ni-Zn Ferrite H. Igarashi;K. Okazaki
  7. J. Magnetics. v.1 no.1 Variation of the Relaxation Time for NiCuZn Ferrites with Magnetic Properties J.-H. Nam;J.-H. Oh
  8. J. Kor. Mag. Soc. v.6 no.6 Complex Permeability Analysis of NiCuZn Ferrites J.-H. Nam;J.-H. Oh