Ultrasonic Vibration Machining of Inconel

초음파 진동 부가에 의한 인코넬의 선삭가공

  • 박명호 (삼척대학교 기계공학과)
  • Published : 2003.03.01


Recently, the demand for advanced technology of high precision and high efficiency processing of hard materials such as inconel is increasing with progress of industrial goods. However, the machinability of inconel is very inferior to the other conventional industrial materials and the machining technology for inconel involves many problems to be solved in machining accuracy, machining efficiency, etc. Therefore it is needs to establish the machining technology. The purpose of this study is to develop an advanced ultrasonic vibration machining technology for inconel, using the 60KHz and 75KHz high frequency, amplitude about 8${\mu}{\textrm}{m}$ and 4${\mu}{\textrm}{m}$, respectively. As the result, this new ultrasonic vibration machining is reasonable and suitable for the high efficient. accuracy machining method of inconel.


  1. 部淳一郞, 1979, 精密加工振動切削-基礎應用, 實敎出版
  2. Choi, I.-H., Kim, J.-D., 1997, 'Characteristics of Chip Generation with Ultrasonic Vibration Cutting in the Extremely Low Cutting Velocity,' KSME, Vol. 21, No.4, pp. 655-662
  3. 山下勇, 朴明浩, 道律毅, 1999, '高い周波數の超音波附加によるインコネルの旋削加工,' 精密工學會沖繩地方講演會論文集, pp. 145-146
  4. 山下 勇, 道律 毅, 1999, 'インコネルの超音波振動旋朔における仕上げ面の評價,' 精密工學會春季大會佐賀地方講演會論文集, pp.232-233