금속기복합재료의 바인더 첨가제에 따른 강도 특성

The Strength Properties of Metal Matrix Composites by Binder Additives

  • 박원조 (경상대학교 수송기계공학부 해양산업연구소) ;
  • 허선철 (경상대학교 수송기계공학부 해양산업연구소)
  • 발행 : 2003.07.01


This study is about controlled impurities, which make metal alloys, especially AC4CH alloy that is made by restraining 0.2% Fe and Aluminum to make a matrix material. A metal matrix composite is produced using the squeeze casting method. The first step in the squeeze casting method is to add some organic binder including aluminum borate whisker into the matrix. After the fabrication of a metal matrix composite, each is individually appended to an inanimate binder such as SiO$_2$, Al$_2$O$_3$, and TiO$_2$. Through experiments the mechanical property changes were investigated between the metal matrix composite and AC4CH alloy. This study proves the superiority of the mechanical property of a metal matrix composites over AC4CH according to the previous tests and results that were mentioned above. One excellent property of matrix material composites is the infiltrated TiO$_2$ reinforcement. This material is a good substitute for the existing materials that are used in the development of industries today.




  1. In-Dong Yeo, Chi-Hwan Lee, 1995, 'Influence of Binder and Applied Pressure on Tensile Strength of $AC4C/Al_2O_3$ Composites Made by Squeeze Casting Process,' Jounal of the Korean Foundrymrn's Society, Vol. 15, No. 2, pp. 138-145
  2. Kyung Cheol Moon, Jun Hee Lee, 1994, 'The Tensile Properties and Microstructure of AC4A/SiC Composites by Squeeze Casting,' Jounal of the Korean Foundrymrn's Society, Vol. 14, No. 2, pp. 176-187
  3. Krager, G., Kainer, K.U., 1993, 'Characterisation of Ceramic Fiber Preforms,' ICCM9, Vol. 2, pp. 15-22
  4. Ahn, H.K., 1998, 'Static and Dynamic Toughness Evaluation in SiC/6061 AI Composite,' Korean Journal of Materials Research, Vol. 8, No. 6, pp. 565-572
  5. Choi, Y.G., Lee, T.S. and Lee, M.H., 1995, 'Fatigue Crack Propagation Behavior and Fracture Mechanism of Short Fiber Reinforced Metal Matrix Composites,' Journal of the KSME, Vol. 19, No. 11, pp. 2817-2829
  6. Nabumi Saito, Masri Nakanishim and Yoshinori Nishida, 1994, 'Effect of Heat Treatment on the Mechanical Properties of Aluminum Borate Whisker Reinforced 6061 Aluminum Alloy,' Journal of Japan Institute of Light Metals, Vol. 44, No. 2, pp. 86-90
  7. In-Dong Yeo, Chi-Hwan Lee, 1994, 'A Study on Interfacial Reactions of ${\delta}-Al_2O_3$ Short Fiber Reinforced AC4C Matrix Composite Materials Manufactured by Squeeze Casting Method,' Journal of the Korean Foundrymrn's Society, Vol. 14, No. 4, pp. 345-352
  8. Sung-Kil Hong, Jung-Yul Yun, Jung-Chul Choi, 1997, 'Fabrication of Aluminum Alloy Composites Reinforced with SiC whisker and $Al_2O_3-SiO_2$ Short Fiber by Squeeze Casting,' Jounal of the Korean Foundrymrn's Society, Vol. 17, No. 1, pp. 28-35
  9. Kang, C.G., 1996, 'Effects of Secondary Forming Process on Mechanical Properties of SiC/AI Composites Fabricated by Squeeze Casting,' Journal of the KSME, Vol. 20, No. 11, pp. 3474-3490
  10. Kim, K.C., Cho, Y.S., Lee, S.H. and Park, I.M., 1996, 'Microstructure and Mechanical Properties of Squeeze Cast AZ91 Mg/Al Borate Whisker Composites,' Jounal of the Korean Foundrymrn's Society, Vol. 16, No. 6, pp. 85-97
  11. Lee, T.S., Kwon, J.D., Kishi, T., Shiwa, M., Kim, S.T., Lee, Y.T., 1995, 'Evaluation of Fracture Mechanism for SiC/SiC Ceramic Matrix Composites by Acoustic Emission Method,' Journal of the KSME, Vol. 19, No. 10, pp. 2421-2430
  12. Hong, C. S. 1994, 'Technology and Status of Composites Applications,' Journal of the KSME, Vol. 34, No. 5, pp. 334-341
  13. Eom, M.K and Lee, W.I. 1994, 'Composite Materials and Their Manufacturing Processes,' Journal of the KSME, Vol. 34, No. 5, pp. 310-325