DOI QR코드

DOI QR Code

Vibration Analysis of Rotating Cantilever Plates with Arbitrary Orientation Angle

임의의 자세를 갖는 외팔평판의 진동해석

  • Published : 2003.08.01

Abstract

Linearized equations of motion for the vibration analysis of rotating cantilever plates with arbitrary orientation angle are derived in the present work. Two in-plane stretch variables are introduced to be approximated. The use of the two in-plane stretch variables enables one to derive the equations of motion which include proper motion-induced stiffness variation terms. The equations of motion are transformed into dimensionless forms in which dimensionless parameters are identified. The effects of the dimensionless parameters on the modal characteristics of rotating cantilever plates are investigated through numerical study. The natural frequency loci veering along with the associated mode shape variations, which occur while the rotating speed increases, are also presented and discussed.

Keywords

Vibration Analysis;Cantilever Plate;Arbitrary Orientation Angle;Natural Frequency;Mode Shape Variation;Natural Frequency Loci Veering

References

  1. Barton, M. V., 1951, 'Vibration of Rectangular and Skew Cantilever Plates,' Journal of Applied Mechanics, Vol. 18, No. 1, pp. 129-134
  2. Leissa, A. W., 1969, Vibration of Plates, NASA SP-160
  3. Ryan, R.R. and Yoo, H.H., 1989, 'Element Specific Linear and Nonlinear Modeling,' SDIO NASA Conference Proceedings, San Diego, California, January
  4. Dokainish, M. and Rawtani, S., 1971, 'Vibration Analysis of Rotating Cantilever Plates,' International Journal for Numerical Methods in Engineering, Vol. 3, pp. 233-248 https://doi.org/10.1002/nme.1620030208
  5. Ramamurti, V. and Kielb, R., 1984, 'Natural Frequencies of Twisted Rotating Plates,' Journal of Sound and Vibration, Vol. 97, No. 3, pp. 429-449 https://doi.org/10.1016/0022-460X(84)90271-2
  6. Yoo, H. H. and Chung, J., 2001, 'Dynamics of Rectangular Plates Undergoing Prescribed Overall Motion,' Journal of Sound and Vibration, Vol. 239, No. 1, pp. 123-137 https://doi.org/10.1006/jsvi.2000.3111
  7. Yoo, H. H., 1993, 'Vibration Analysis of Rotating Cantiliever Plates,' Transactions of the KSME, Vol. 17, No. 3, pp. 652-657
  8. Young, D., 1950, 'Vibration of Rectangular Plates by the Ritz Method,' Journal of Applied Mechanics, Vol. 17, No. 4, pp. 448-453
  9. Southwell, R. and Gough, F., 1921, 'The Free Transverse Vibration of Airscrew Blades,' British A.R.C. Reports and Memoranda, No. 766
  10. Theodorsen, T., 1935, 'Propeller Vibrations and the Effect of Centrifugal Force,' NASA TN, No. 516
  11. Schilhansl, M., 1958, 'Bending Frequency of a Rotating Cantilever Beam,' Transaction of ASME, Journal of Applied Mechanics, Vol. 25, pp. 28-30
  12. Putter, S. and Manor, H., 1978, 'Natural Frequencies of Radial Rotating Beams,' Journal of Sound and Vibration, Vol. 56, pp. 175-185 https://doi.org/10.1016/S0022-460X(78)80013-3
  13. Bhat, R., 1986, 'Transverse Vibrations of a Rotating Uniform Cantilever Beam with Tip Mass as Predicted by Using Beam Characteristic Orthogonal Polynomials in the Rayleigh-Ritz Method,' Journal of Sound and Vibration, Vol. 105, No. 2, pp. 199-210 https://doi.org/10.1016/0022-460X(86)90149-5