DOI QR코드

DOI QR Code

An Internet-based Dimensional Verification System for Reverse Engineering

역설계를 위한 인터넷 기반의 치수검증 시스템

  • 송인호 (한양대학교 기계설계학과) ;
  • 김경돈 (한양대학교 기계설계학과) ;
  • 정성종 (한양대학교 기계공학부)
  • Published : 2003.08.01

Abstract

In the 21st century, the concept of remote design and manufacture is strongly required in manufacturing processes to reduce cost and time-to-market. The objective of this paper is the development of an internet-based dimensional verification system for reverse engineering. An inspection client can register measurement data at the developed web server. Collaborators related to the development of a new product can confirm geometrical form from measurement data, check dimensional information and mark up the important parts, as well as make a statement of their views through the Internet. The developed system is realized through the ActiveX-Server architecture. Functions of the dimensional verification module are constructed as ActiveX by using the visual C++ and OpenGL. The usefulness of the developed system is confirmed through a case study.

Keywords

ActiveX;Collaborative Work;Dimensional Verification;Internet;Mark Up;Remote Design & Manufacture;Reverse Engineering

References

  1. Chung, S. C. and Kim, K. D., 1999, 'Design and Analysis of $2^{1/2}$ Dimensional On-the-Machine Measuring and Inspection System Using touch Trigger Probes,' Transactions of the KSME, A, Vol. 23, No. 1, pp. 37-46
  2. Chung, S. C. and Kim, K. D., 2001, 'Synthesis of the Measurement System on the Machine Tool,' International Journal of Production Research, Vol. 39, No. 11, pp. 2475-2497 https://doi.org/10.1080/00207540110045939
  3. Kim, H. B., Lee, W. Y. and Choi, S. J., 1999, 'A Study on the VRML Visualization of CMM data and the Server Development for Web based Collaborate Design,' Proc. 1999 Spring Meeting of KSME, pp. 530-535
  4. Birngruber, D., Kurshl, W. and Sametinger, J., 1999, 'Comparsion of JavaBeans and ActiveX - A Case Study,' STJA, pp. 36-42
  5. Ahn, S. H., et al., 2001, 'CyberCut: An Internet-based CAD/CAM System,' Transactions of ASME, Vol. 1, No. 4, pp. 52-59 https://doi.org/10.1115/1.1351811
  6. Oh, Y. C. and Han, S. H., 2001, 'Collaborative Design Using Parts Database on the Internet,' Journal of KSPE, Vol. 18, No. 5, pp. 23-28
  7. Kan, H. Y., Duffy, V. G. and Su, C. J., 2001, 'An Internet Virtual Reality Collaborative Environment for Effective Product Design,' Computers in Industry, Vol. 45, pp. 197-213 https://doi.org/10.1016/S0166-3615(01)00093-8
  8. Dassault Systemes Homepage, http://www.3ds.com
  9. PTC Homepage, http://www.ptc.com
  10. Ahn, S. H., Roundy, S., Wright, P. K. and Liou, S. Y., 1999, 'Design Consultant : A Network-based Concurrent Design Environment,' Proceeding of ASME IMEC & E, pp. 23-30
  11. Huang, G. Q., 2002, 'Web-Based Support for Collaborative Product Design Review,' Computers in Industry, Vol. 48, pp. 71-88 https://doi.org/10.1016/S0166-3615(02)00011-8