드릴링 공정의 열거동 해석과 관측기를 이용한 온도 추정법

Analysis of Thermal Behavior and Temperature Estimation by using an Observer in Drilling Processes

  • 김태훈 (신도리코 주식회사) ;
  • 정성종 (한양대학교 공과대학 기계공학부)
  • 발행 : 2003.09.01


Physical importance of cutting temperatures has long been recognized. Cutting temperatures have strongly influenced both the tool life and the metallurgical state of machined surfaces. Temperatures in drilling processes are particularly important, because chips remain in contact with the tool for a relatively long time in a hole. Tool temperatures tend to be higher in drilling processes than in other in machining processes. This paper concerns with modeling of thermal behaviors in drilling processes as well as estimation of the cutting temperature distribution based on remote temperature measurements. One- and two-dimensional estimation problems are proposed to analyze drilling temperatures. The proposed thermal models are compared with solutions of finite element methods. Observer algorithms are developed to solve inverse heat conduction problems. In order to apply the estimation of cutting temperatures, approximation methods are proposed by using the solution of the finite element method. In two-dimensional analysis, a moving heat source according to feedrate of the drilling process is regarded as a fixed heat source with respect to the drilling location. Simulation results confirm the application of the proposed methods.


  1. Stephenson, D.A. and Agapiou, J.S. 1997, Metal Cutting Theory and Practice, Marcel Dekker, INC. pp. 491-527
  2. DeVires, M.F. and Wu, S.M., 1970, 'Evaluation of the Effects of Design Variables on Drill Temperature Responses,' Trans. ASME, J. Eng. Ind., pp. 699-705
  3. Agapiou, J.S. and Stephenson, D.A., 1994, 'Analytical and Experimental Studies of Drill Temperatures,' Trans. ASME, J. Eng. Ind., Vol. 116, pp. 54-60
  4. Saxena, U.K., DeVries, M.F. and Wu, S.M., 1971, 'Drill Temperature Distribution by Numerical Solutions,' Trans. ASME, J. Eng. Ind., pp. 1057-1066
  5. Agapiou, J.S. and DeVries, M.F., 1990, 'On The Determination of Thermal Phenomena During Drilling,' Int. J. Mach. Tools Manufact., Vol. 30, pp. 203-215
  6. S.-H., Ryu, D.-W., Cho, 1997, 'A Study on the Thermal Behavior during Micro Hole Drilling,' Proc. of the KSPE 1997 Autumn Meeting, pp. 79-84
  7. J.-Y., Ahn, Y.-M., Park, S.-C., Chung, 2001, 'Real Time Estimation in I-Dimensional Temperature Distribution Using Modal Analysis and Observer,' Transaction of the KSME, B, Vol. 25, No.2, pp. 195-204
  8. J.-Y., Ahn, T-H., Kim, S.-C., Chung, 2001, 'Real Time Estimation of Temperature Distribution of a Ball Screw System Using Modal Analysis and Observer,' Transaction of the KSME, A, Vol. 25, No. I, pp. 145-152
  9. J.- Y., Ahn, T-H., Kim, S.-C., Chung, 2000, 'Realtime Estimation of Temperature Distribution in a Ball Screw System Using Observer and Adaptive Algorithm,' Proc. of the 15th Annual Meeting ASPE, pp. 304-307
  10. Tandy. D.F., Trujillo, D.M. and Busby, H.R, 1986, 'Solution of Inverse Heat Conduction Problems Using an Eigenvalue Reduction Technique,' Numerical Heat Transfer, Vol. 10, pp. 597-617
  11. Stephenson, D.A., 1991, 'An Inverse Method for Investigating Deformation Zone Temperatures in Metal Cutting,' Trans. ASME, J. Eng. Ind., Vol. 113, pp. 129-136
  12. Joachim Blum and Wolfgang Marquardt, 1997, 'An Optimal Solution to Inverse Heat Conduction Problems Based on Frequency-Domain Interpretation and Observers,' Numerical Heat Transfer, Part B, 32, pp. 453-478
  13. Jen, TC. and Lavine, A.S., 1995, 'A Variable Heat Flux Model of Heat Transfer in Grinding : Model Development,' Trans. ASME, J. Heat Transfer, Vol. 117, pp.473-478