DOI QR코드

DOI QR Code

Three Dimensional Finite Element Analysis of the Deformation Behavior of pure-Zr during Equal Channel Angular Pressing

등통로각압축(ECAP)공정에서 순수 지르코늄의 변형거동에 대한 3차원 유한요소 해석

  • 이강무 (고려대학교 대학원 기계공학과) ;
  • 권기환 (고려대학교 대학원 기계공학과) ;
  • 권숙인 (고려대학교 금속공학과) ;
  • 김명호 (인하대학교 금속공학과) ;
  • 황선근 (인하대학교 금속공학과) ;
  • 채수원 (고려대학교 기계공학과)
  • Published : 2003.09.01

Abstract

A lot of researches have been performed on the equal channel angular pressing (ECAP) which produces ultra-fine grains. Along with the experiments, the finite element method has been widely employed to investigate the deformation behavior of specimen during ECAP and the effects of process parameters of ECAP. In this paper, pure-Zirconium is considered for ECAP process by using three-dimensional finite element analysis. The results have been compared with those of previous two-dimensional analysis and with the experimental results

Keywords

Equal Channel Angular Pressing(ECAP);Three Dimensional Finite Element Method;pure-Zr;Side Friction

References

  1. Segal. V.M., Rezenikov. V.I., Drobyshevskiy. A.E., Kopylov. V.I., 1981, 'Plastic Working of Metals by Simple Shear,' Metally(Eng. Trans. : Russian Metallurgy) Vol. 1, pp. 99-105
  2. Iwahashi. Y, Wang. J., Horita. Z., Nemoto. M. and Langdon. T.G, 1996, 'Principle of Equal-Channel Angular Pressing for the Processing of Ultra-Fine Grained Metals,' Scripta Mater., Vol. 35, No.2, pp. 143-146 https://doi.org/10.1016/1359-6462(96)00107-8
  3. Prangnell. P.B., Harris. C. and Roberts. S.M., 1997, 'Finite Element Modelling of Equal Channel Angular Extrusion,' Scripta Mater., Vol. 37, No.7, pp. 983-989 https://doi.org/10.1016/S1359-6462(97)00192-9
  4. Bowen. J.R., Gholinia. A., Roberts. S.M., Prangnell. P.B., 2000, 'Analysis of the Billet Deformation Behavior in Equal Channel Angular Extrusion,' Mater. Sci. & Eng., Vol(A)287, pp. 87-99 https://doi.org/10.1016/S0921-5093(00)00834-0
  5. Kwon.G.H., Chae.S.W, Kwun.S.I, Kim.M.H, Hwang.S.K, 2001, 'Effects of Die Deformation and Channel Angle on Deformation Behavior of Materials During Equal Channel Angular Pressing with Pure-Zr,' Trans. Of KSME, Vol. 25, No. 11, pp. 1751-1758
  6. Seo.M.H., Kim.H.S., Hong.S.I., 2000, 'Finite Element Analysis of Equal Channel Angular Pressing,' J.Kor.Inst.Met.&Mater. Vol. 38, No. 1, pp. 136-140
  7. Kim, H.S., 2001, 'Finite Element Analysis of Equal Channel Angular Pressing Using a Round Comer Die,' Mater. Sci. & Eng, A315, pp. 122-128 https://doi.org/10.1016/S0921-5093(01)01188-1
  8. Srinivasan. R., 2001, 'Computer Simulation of the Equichannel Angular Extrusion(ECAE) Process,' Scripta Mater., Vol. 44, No. 1, pp. 91-96 https://doi.org/10.1016/S1359-6462(00)00546-7