Impact and Rebounding Properties of Shoe Midsole with Temperature

온도변화에 따른 신발 중창용 발포체의 충격 및 반발특성

  • 박차철 (동서대학교 응용생명공학부 신발공학과)
  • Published : 2004.12.31

Abstract

Sorage modulus(G'), Impact and rebounding properties of polyurethane(PU), phylon(PH) and injection phylon(IP) foams were studied. The storage modulus of PU foam was dramatically increased with decreasing temperature. But the storage modulus(G') of IP and PH foams were not affected by temperature. The Impact force of PU foams was increased with decreasing temperature. But in the cases of IP and PH foams, the impact forces were not changed with temperature below $20^{\circ}C$. Impact farces of IP and PH foams were increased with the temperature above $20^{\circ}C$, but that of PU foam was not changed. Rebounding resilience of PU foam was lower than those of IP and PH foams from $-20^{\circ}C$ to $40^{\circ}C$.

References

  1. J. H. Park, W. M. Sung, J. C. Hyun, W. N. Kim, B. K. Hong, J. H. Hong, and Y. S. Lim, 'The Effects of Blend Composition and Compatibilizer on the Mechanical Properties of the PP/SAN and the PP/ABS Blends.' Polymer(Korea), 26(1), 53 (2002).
  2. J. M. Oh and I. S. Noh, 'Studies on the Compatibility of PC/Styrenic Copolymer Blends Systems Using Reactive Compatibilizer.' Polymer'(Korea), 20(2), 328 (1996)
  3. 오준석, '운동화의 기능학적 특성에 관한 연구', 연세대학교대학원 석시학위논문, p.9-16, (1984)
  4. 김태형, '에어로빅스 하이킥시 운동화 중저의 경도에 따른 지면반력의 변화 및 발의 안정성에 관한연구', 서울대학교 대학원 석사학위논문, p.7-17, (1996)
  5. 곽창수, '운동화 중저의 경도가 주행시 발바닥의 압력분포와 충격흡수에 미치는 영향', 서울대학교 대학원 박사학위논문, p.25-42, (1993)
  6. Y. S. Hur, C. S. Ha, and W. J. Cho, 'The Research Trend of the Copolymer-Based Compatibilizers for the Recycling of Waste Plastics.' Polymer(Korea), 10(4), 293 (1986)
  7. S. Ahn, H Y. Lee, and H. M. Jung, 'Miscibility and Mechanical Properties of Polycaprolactonepolymide Block Copolymer/poly(vinyl chloride) Blend.' Polymer(Korea) , 24(I), pp.128-132 (2000)