Building Sensor P2P Network Design using Embedded System

임베디드 시스템을 이용한 빌딩 센서 P2P 네트워크 설계

  • Published : 2004.10.01


Architecture generation is the first step in the design of software systems. Most of the qualities that the final software system possesses are usually decided at the architecture development stage itself. Thus, if the final system should be usable, testable, secure, high performance, mobile and adaptable, then these qualities or non-functional requirements should be engineered into the architecture itself. In particular, adaptability is emerging as an important attribute required by almost all software systems. The machinery and tools in the remote site surveillance and connects intelligence information machinery and tools at Internet. We need the server which uses different embedded operating system to become private use. With the progress of information-oriented society, many device with advanced technologies invented by many companies. However, the current firmware technologies have many problems to meet such high level of new technologies. In this paper, we have successfully ported linux on an embedded system, which is based on intel Strong ARM SA-1110 processor, then written several network modules for internet-based network devices.


  1. Thomas Batt, Embedded Internet in Vielen Variationen, Elektronik
  2. protocol on chip
  3. , 2002
  4. imec, 'RTLinux for StrongARM',
  5. Michael Barr, 'Programming Embedded Systems in C and C++', O'Reilly, 1999
  6. F. Balarin, L. Lavagno, P. Murthy, and A. S. Vincentelli, 'Scheduling for Embedded Real Time Systems', IEEE, 1998
  7. Rick Lehrbaum, 'Using Linux in Embedded and Real-Time Systems', http://www.linuxdevices. com/articles/ , Feb 2000
  8. Real Time Magazine, 'Comparison between VxWorks/x86 5.3.1, QNX 4.25 and pSOSytem/x86 2.2.6', April 1999
  9. Intel, 'Intel StrongARM SA-111O Microprocessor',
  10. PalmPalm Technology Inc. ,Tynux Box Ⅱ Hardware Manual