초미세발포 플라스틱 기어에 관한 연구 (I) - 초미세발포 플라스틱 기어의 공정설계 -

Injection Molded Microcellular Plastic Gear (I) - Process Design for the Microcellular Plastic Gear -

  • 하영욱 (한양대학교 대학원 기계설계학과) ;
  • 정태형 (한양대학교 기계공학과)
  • 발행 : 2005.05.01


This research Proposes a Process design of injection molded microcellular plastic gears for enhancing the fatigue strength/durability and accuracy of the gears applying thermodynamic instability to microcellular foaming process. To develop the injection molded plastic gears by way of microceliular process, it is absolutely necessary the following two process design. The first is microcellular forming process for enhancing the strength/durability of plastic gears. To be microcellular process succeeded, based on the microcellular principle, mechanical apparatus is designed where nucleation and cell growth are to be generated renewably. The second is the counter pressure process which is mainly fur improving the tooth surface roughness and the accuracy of microcellular gears. For the former process, screw, nozzle and gas equipment are newly designed, and for the latter, counter pressure by nitrogen gas is intentionally brought about into mold cavity when injecting plastic gears. Based on the proposed process design, using gear mold, experiments of injection molding show that, in internal space of plastic gears, microcellular nuclear cells less than 5 lim in diameter have been generated homogeneously via electron microscope photos.


기어;초미 세발포 플라스틱 기어;피로강도;기어 정밀도;열역학적 불안정성;핵생성;셀성장;카운터 프레션


  1. Macdermott, C. P. and Shenoy, A. V., 1997, Seleting Thermoplastics for Engineering Application, 2nd Ed., Marcel Dekker, Inc., New York
  2. Tsukamoto, N., Maruyama, H. and Terashima, K., 1990, 'Fundamental Characteristics of Plastic Gears Made of Thermoplastic Resin Filled with Variouus Fibers,' JSME International Journal, Series C, Vol. 33, No.4, pp. 590-596
  3. Shoji, A., Nogami, M. and Satho, I., 1996, 'Studies on the Strength of Injection Molded Plastic Gears,' Power Transmission and Gearing Conference, ASME Vol. 88, pp. 739-744
  4. Park, C. B. and Suh, N. P., 1993, 'Extrusion of Microcellular Polymers Using a Rapid Pressure Drop Device,' Society of Plastic Engineers Technical Papers, Vol. 39, pp. 1818-1822
  5. Martini, J., Suh, N. P. and Waldman, F. A., 1982, 'The Production and Analysis of Microcellular Thermoplastic Foam,' Proceeding of the SPE ANTEC, Vol. 28, pp. 674-676
  6. Seeler, K. A. and Kumar, V., 1993, 'Tension-Tension Fatigue of Microcellular Polycarbonate: Initial Results,' Journal of Reinforced Plastics and Composites, Vol. 12, pp. 359-376
  7. Park, C. B., Baldwin, D. F. and Suh, N. P., 1993, 'Cell Nucleation by Rapid Pressure Drop in Continuous Processing of Microcellular Plastics,' Proceeding of ASME, New Orleans, LA
  8. Durril, P. L. and Griskey, R. G., 1966, 'Diffusion and Solution of Gases in Thermally Sofened or Molton Polymers: Part 1,' A.I.Ch.E. Journal, Vol. 12, No.6, pp.1147-1151
  9. Peter, K., 1995, Flow Analysis of Injection Molds, Hanser and Gardner Publications, Inc. pp. 6-107