Optimum Design of Prestressed Concrete Girder Railway Bridge

프리스트레스트 콘크리트 거더 철도교의 최적설계

  • 이종민 (서울산업대학교 철도건설공학과) ;
  • 서동주 (서울산업대학교 토목공학과) ;
  • 이태균 (한국철도시설공단) ;
  • 이종선 ((주)남광토건) ;
  • 조선규 (서울산업대학교 철도건설공학과)
  • Published : 2005.06.01


Prestressed concrete girder(PSC girder) bridges have been used widely at the railway as well as highway because they are great in the functional and economical efficiency. Also they have the advantage of convenience of design and construction. However it could be easily verified that the section of PSC girder is excessive design, which has much redundancy against design loads. Thus, in this paper the formulation of the optimum design for PSC girder railway bridge is suggested and dominant design variables and constraints are inquired as performing the optimum design. In order to effective optimum design, design variables are formulated as PSC girder sectional dimension and girder space. The objective is adopted as total cost of PSC girder railway bridge. Also, constraints are formulated according to Korean railway design specification and considering construction-ability such as PS anchorage and girder space. Using the proposed optimum design system, optimum PSC girder railway bridge design has been performed. And from the results of analysis it is suggested to denote the optimum section which satisfies the structural safety and economical efficiency all together.


  1. 조선규, 최외호(2000) '프리스트레스트 콘크리트 보 단면의 최적설계', 한국콘크리트학회논문집, 제12권 4호, pp. 91-101
  2. 한국콘크리트학회(2000), 콘크리트구조설계기준.해설
  3. 철도청(2003), 중앙선(덕소-양수간)복선전철 건설공사 구조계산서 및 도면
  4. Garret N. Vanderplaats(1985), ADS: A FORTRAN Program for Automated Design Synthesis, Engineering Design Optimization, Inc., Santa Barbara, California
  5. 건설교통부(2004) 철도설계기준(철도교편)
  6. Al-Gahtain, Ahmed (1986). Optimum Design of Welded IBeams Subjected to Highway Bridge Loads. Ph.D dissertation, Univ. of Iowa
  7. Al-Shaleh, Khaled Saad (1994), Optimum Design of Straight Steel Box Girder Bridges, Ph.D dissertation, Georgia Institute of Technology
  8. Garret N. Vanderplaats (1984). Numerical Optimization Techniques for Engineering Design: with Applications, McGraw-Hill, Inc
  9. 조선규, 조효남, 민대홍, 이광민, 김환기(2000) '설계민감도 해석을 이용한 P.S.C 박스거더교의 최적설계', 한국콘크리트학회 논문집, 제12권 2호, pp.205-216
  10. 조선규, 윤석구, 박영하(2004) '표준단면을 위한 프리스트레스트 콘크리트 거더의 단면최적설계', 대한토목학회논문집, 제 24권 4A호, pp.853-859
  11. Robert F. Mast (1989). Lateral Stability of Long Prestressed Concrete Beams-Part1. PCI Joural, Vol.34, No.1, pp. 34-53 https://doi.org/10.15554/pcij.01011989.34.53
  12. Lust, R.V. and L.A.Schmit (1985), Alternative Approximation Concepts for Space Frame Synthesis, AIAA/ASME /ASCE/AHS 26th Structures, Structural Dynamics and Materials Conference, pp. 333-348, April
  13. 조선규(2001) '이동식 비계공법에 의한 프리스트레스트 콘크리트 박스거더교의 최적설계', 단국대학교 박사학위논문