DOI QR코드

DOI QR Code

Crystal Plasticity Simulation of Ti-6Al-4V Under Fretting Fatigue

프레팅 피로를 받는 Ti-6Al-4V의 결정소성 시뮬레이션

  • 고충현 (한밭대학교 기계설계공학과) ;
  • 이기석 (충남대학교 기계공학과) ;
  • 고준빈 (한밭대학교 기계설계공학과)
  • Published : 2005.04.01

Abstract

Fretting fatigue is often the root cause of the nucleation of cracks at attachments of structural components. Since fretting fatigue damage accumulation occurs over relatively small volumes, the subsurface cyclic plastic strain is expected to be rather non-uniformly distributed in polycrystalline materials. The scale of the cyclic plasticity and the damage process zones is often on the order of microstructure dimensions. Fretting damage analyses using cyclic crystal plasticity constitutive models have the potential to account for the influence of size, morphology, and crystallographic orientation of grains on fretting damage evolution. Two-dimensional plane strain simulations of fretting fatigue are performed using the cyclic properties of Ti-6Al-4V. The crystal plasticity simulations are compared to an initially isotropic $J_{2}$ theory with nonlinear kinematic hardening as well as to experiments. The influence of initially isotropic versus textured microstructure in the presence of crystallographic slip is studied.

Keywords

Fretting Fatigue;Crack Nucleation;Crystal Plasticity;Drag Strength;Back Stress

References

  1. Bennett, V., 1999, 'A Study of Microscale Phenomena in Small Crack Propagation under Multiaxial Fatigue,' Ph.D. Thesis, Georgia Institute of Technology, Atlanta, GA
  2. McGinty, R.D. and McDowell, D.L., 1999, 'Multiscale Polycrystal Plasticity,' Journal of Engineering Materials and Technology, Vol. 121, pp. 203-209 https://doi.org/10.1115/1.2812367
  3. Cuitio, A.M. and Ortiz, M., 1992, 'Computational Modeling of Single Crystals, 'Modeling and Simulation in Materials,' Science and Engineering, Vol. 1, pp. 225-263 https://doi.org/10.1088/0965-0393/1/3/001
  4. Asaro, R.J. and Rice, J.R., 1977, 'Strain Localization in Ductile Single Crystals,' J. Mech. Phys. Solids, Vol. 25, pp. 309-338 https://doi.org/10.1016/0022-5096(77)90001-1
  5. ABAQUS, 1998, version 5.8, Hibbitt, Karlsson and Soreness, Inc., Pawtucket, RI
  6. Bennett, V. and McDowell, D.L., 1999, 'Polycrystal Orientation Effects on Microslip and Mixed Mode Behavior of Microstructurally Small Cracks,' Mixed Mode Crack Behavior, ASTM SIP 1359, K.J. Miller and D.L. McDowell, Eds., pp. 203-228
  7. McVeigh, P.A. and Farris, T.N., 1997, 'Finite Element Analysis of Fretting Stresses,' J. of Tribology, Vol. 119, pp. 797-801 https://doi.org/10.1115/1.2833887
  8. Swalla, D.R., 1999, 'Fretting Fatigue Damage Prediction using Multiaxial Fatigue Criteria,' M. S. Thesis, Georgia Institute of Technology, Atlanta, GA

Cited by

  1. Analysis of Two-Way Fluid-Structure Interaction and Local Material Properties of Brazed Joints for Estimation of Mechanical Integrity vol.37, pp.1, 2013, https://doi.org/10.3795/KSME-A.2013.37.1.009