DOI QR코드

DOI QR Code

A Study on the Tensile Property of Ring Specimen Having Gauge Length

평행부를 갖는 링 시험편의 인장특성 고찰

  • 배봉국 (성균관대학교 기계공학부) ;
  • 구재민 (성균관대학교 기계공학부) ;
  • 석창성 (성균관대학교 기계공학부)
  • Published : 2005.04.01

Abstract

In this study, we tried to establish the method of evaluating the tensile properties of the ring specimen of Arsene which have gauge length. In this result, we verified the availability of central piece. We made ring specimens and devices such as central piece, pins, and clevises. A proper tensile speed was determined by pre-test. The result of main test was calibrated and compared with the result of FEM. To obtain the tensile properties from the ring test result, we observed two relationships: one is strain-displacement and the other is load ratio-displacement. The tensile properties could be evaluated by using these relationships.

Keywords

Ring Test;Ring Specimen;Load-Displacement Conversion Relationship of Ring(LCRR)

References

  1. ISO 8496:1988(E), 1998, Metallic materials-Tube-Ring tensile test, International Standard
  2. Krashchenko, V. P. and Gurarii, A. I., 1993, 'Method of Tensile Testing Ring Specemin (Review),' Trans. from Zavodskaya Laboratoriya, Vol. 51, No. 11, pp. 66-69
  3. Link, T. M., Koss, Don and Motta, Thompson, 1998, 'Failure of Zircaloy under transverse plane-strain deformation,' Nuclear Eng. and Design, Vol. 186, pp. 379-394 https://doi.org/10.1016/S0029-5493(98)00284-2
  4. Arsene, Sylvie and Bai, Jinbo, 1996, 'New approach to measuring transverse properties of structural tubing by a ring test,' J. of Testing & Evaluation, Vol. 24, No. 6, pp. 386-391 https://doi.org/10.1520/JTE11461J
  5. Arsene, Sylvie and Bai, Jinbo, 1998, 'New approach to measuring transverse properties of structural tubing by a ring test - experimental investigation,' J. of Testing & Evaluation, Vol. 26, No. 1, pp. 26-30 https://doi.org/10.1520/JTE11966J
  6. ASTM, 1992, 'Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Tubes,' ASTM B523-92, pp. 375 - 378
  7. K.W. Lee, S.K. Kim, K.T. Kim and S.I. Hong, 2001, 'Ductility and Strain Rate Sensitivity of Zircaloy-4 Nuclear Fuel Claddings,' J. of Nuclear Materials, Vol. 295, pp. 21-26 https://doi.org/10.1016/S0022-3115(01)00509-8
  8. Pierron, O. N., Koss, D. A. and Motta, A. T., 2003, 'Tensile Specimen Geometry and the Constitutive Behavior of Zircaloy-4,' J. of Nuclear Materials, Vol. 312, pp. 257-261 https://doi.org/10.1016/S0022-3115(02)01554-4
  9. Kohyama, A., Sato, S. and Hamada, K., 1993, 'An Automated Tensile Machine for Small Specimen Heavily Neutron Irradiated in FFTF/MOTA,' ASTM STP 1204, pp. 356-367
  10. Kasiviswanathan, K. V., Hotta, S. K., Mukhopadhyay, C. K. and Raj Baldev, 1998, 'Miniature Shear Punch Test with On-line Acoustic Emission Monitoring for Assessment of Mechanical Properties,' ASTM STP 1329, pp. 523 - 538
  11. Thak Sang Byun, Joo Hark Kim, Se Hwan Chi and Jun Hwa Hong, 1998, 'Effect of Specimen Thickness on the Tensile Deformation Properties of SA508 C1.3 Reactor Pressrure Vessel Steel,' ASTM STP 1329, pp. 575-587
  12. Bong-Kook Bae, Chun-Ho Song and Chang-Sung Seok, 2003, 'A Study on Mechanical Properties of Fuel Cladding Materials,' KSME (A), Vol. 27, No.2, pp. 231-238 https://doi.org/10.3795/KSME-A.2003.27.2.231

Cited by

  1. A Practical Approach to Evaluate Stress–Strain Behavior of Remotely Handled Pressure Tubes of Nuclear Reactors Using Ring Tension Test vol.68, pp.2, 2015, https://doi.org/10.1007/s12666-014-0461-0
  2. Design Aspects of a Ring Tension Test Setup and Evaluation of Transverse Material Stress-Strain Curve of Tubular Components Using FE Analysis vol.44, pp.6, 2015, https://doi.org/10.1520/JTE20140010