Study on the improved efficiency of Microwave linear Power amplifier

마이크로파대용 선형 전력증폭기의 효율개선에 관한 연구

  • 부종배 (한국전파진흥원 강릉 사업소) ;
  • 김갑기 (목포해양대학교 해양전자통신공학부)
  • Published : 2006.11.30

Abstract

Current digital communication system is selecting very various digital Modulation way. Need linear power amplifier necessarily to reduce interference for contiguity channel maximum in this communication system and at the same time, power amplifier of high efficiency is required. In this paper Compare with result of equilibrium power amplifier that design Doherty power amplifier of way that linearity and efficiency are improved at the same time through simulation optimization techniques and at the same time design through simulation, efficiency 20% linearity showed 10dB that is improved.

References

  1. W.H. Doherty, 'A New High Efficiency Power Amplifier for Modulated Waves,' Proc. IRE, Vol. 24, No. 9, pp. 1163-1182, 1936 https://doi.org/10.1109/JRPROC.1936.228468
  2. C. Tongchoi, M. Chongcheawchamnan and A. Worapishet, 'Lumped Element Lumped Based Doherty Power Amplifier Topology in CMOS Process,' IEEE, 1445-448, 2003
  3. I. Masaya, et al., 'An extended Doherty amplifier with high efficiency over a wide power range, ' , IEEE Trans. Microwave Theory Tech., vol. 49 no. 12, Dec. 2001
  4. Antoine Rabany, 'Accuracy of LDMOS model Measurement versus simulation' , Motorola , January 2003, rev0
  5. Y. Yang, J. Yi, Y. Y. Woo, and B. Kim, 'Optimum design for linearity and efficiency of microwave Doherty amplifier using a new load matching technique,' Microwave J., vol. 44, no. 12, pp. 20-36, Dec. 2001
  6. S. C. Cripps, RF Power Amplifiers for Wireless Communications.Norwood, MA: Artech House, 1999
  7. P.B. Kenington, 'High-Linearity RF Amplifier Design,' Artech House Inc., 2000