DOI QR코드

DOI QR Code

Analysis of the Thickness Effect for Hysteresis Ring of Hysteresis Motor with Vector Hysteresis Model

  • Hong, Sun-Ki (Dept. of Information & Control, Hoseo University)
  • Published : 2006.11.30

Abstract

This paper presents the thickness effect of hysteresis ring of hysteresis motor using finite element method combined with a vector hysteresis model. From the magnitude and direction of the magnetic field intensity, the magnetization of each ring element is calculated by a vector hysteresis model. The developed torque can be obtained with the vector sum of individual torque of each element on the hysteresis ring. From these calculations, it can be found that the motor torque is not in proportion to the thickness of the ring. As a result, there exists a proper point of thickness and that can be determined using the proposed methoㅇ in this paper.

References

  1. G. Wakui, 'On the Most Appropriate Conditions about the Design of Hysteresis Motor,' Trans. IEE Japan, Vol.41, pp.1968-1976, 1966
  2. G. Wakui, 'Alternating Hysteresis and Rotational Hysteresis in the Hysteresis Motor,' Trans. IEE Japan, Vol.45, pp.1558-1967, 1970
  3. S. Hong, D. Kim, H. Jung and J. Won, 'Vector hysteresis model for unoriented mgnetic materials,' IEEE Trans. on Magn., Vol. 30, No. 6, pp.2928-2930, September, 1994 https://doi.org/10.1109/20.312550
  4. S. Hong, S. Lee and J. Won 'Properties of the Vector hysteresis model for unoriented magnetic materials,' IEEE Trans. on Mag., Vol. 31, No. 3, pp.1833-1836, May 1995 https://doi.org/10.1109/20.376394
  5. Sun-Ki Hong, Hong-KyuKim and Hyun-Kyo Jung, 'Finite Elemnt Analysis of Hysteresis Motor Using the Vector Magnetization-Dependent Model,' IEEE Trans. on Magn., Vol. 34, No. 5, pp.3495-3498, September 1998 https://doi.org/10.1109/20.717824
  6. T. Doong, and I.D. mayergoyz, 'On Numerical Impementation of Hysteresis Model,' IEEE Trans. on Mag., Vol. MAG-21, No. 3, pp.1853-1855, 1985
  7. H.Y.Lee, S.Y.Hahn, G.S.Park and K.S.Lee, 'Torque Comoutation of Hysteresis Motor by Finite Elemnt Analysis with Asymetric magnetic Permeability Tensor,' 11th COMUMAG, Vol 1, pp.49-50, November 1997