# 마이크로 와이어의 직선화 처리에 관한 연구

• 김웅겸 (강원대학교 메카트로닉스공학과) ;
• 홍남표 (강원대학교 산업기술연구소) ;
• 김병희 (강원대학교 기계.메카트로닉스공학부) ;
• 김헌영 (강원대학교 기계.메카트로닉스공학부)
• Published : 2006.09.01
• 171 15

#### Abstract

This paper deals with the effect of the direct heating method(DHM) for straightening the micro wire. Straightened micro wires have been widely used in the fields of the medicine and the semi-conductor. We have developed a micro wire straightening system by using the direct wire heating method. To controling the tension of the micro wire during the heating and straightening process, a precision tension sensor was set up. In order to avoid the surface oxidation during the heating process, the argon inert gas was supplied to the vicinity of the wire. And, this paper shows the correlation between the tension and the current when arson gas supplied to the tungsten wire. Through several experiments, the optimal tension and current were found. Also, higher straightness $({\approx}1{\mu}m/1000{\mu}m)$ and roundness$(<{\Phi}{\pm}2{\mu}m/100{\mu}m)$ founded when $500{\mu}600gf$ tension and 1.5 ampere.

#### Keywords

Direct Heating Method;Micro Wire;Straightening;Surface Oxidation

#### References

1. Kim, B. H., Kim, W. K., Kim, H. Y., Yoon, S. M. and Na, K. H., 2005, 'A Study on the Straightening Process of Micro Wires,' 5th Japan-Korea Joint Symposium on MicroFabrication, Vol. 5
2. Kim, H. J., 2001, 'The Present Development of LTPS TFT-LCD,' The Korea Information Display society, Vol. 2, No.1, pp. 30-35
3. M. Nastran and K. Kuaman, 2002, 'Stabilization of Mechanical Properties of the Wire by Roller Straightening,' Journal of Materials Processing Technology, pp. 711-719 https://doi.org/10.1016/S0924-0136(02)00316-3
4. Kim, S. C. and Chun, S. C., 2002, 'Synthesis of the Multi-step Straightness Control System for Shaft Straightening Process,' Mechatronics, pp. 139-156 https://doi.org/10.1016/S0957-4158(00)00066-0
5. Lee, D. Y., Chung, Y. H. and Shin, M. C., 1982, 'Development of Residual Stress in Roll Straightened Tubes,' Journal of the Korean Institute of Metals, Vol. 20, No. 12, pp. 1086-1089
6. Lee, D. H., Park, S. J., Sohn, J. H. and Yoo, W. S., 2002, 'An Evaluation of Load of the Steel Bar Straightener Using Plastic Moment,' Journal of the Korean Society for Railway, Vol. 5, No.3, pp. 195-199
7. Han, H. K., Kim, S. I. and Y. C. Yoo, 2000, 'Predict on Flow Curves and Micro Structure of 304 Stainless Steel,' The Korean Society for Technology of Plasticity Conference, Vol. 9, No. 1, pp. 72-79
8. MiKAEL' A. Bramson, 1995, 'Infrared Radiation(A Handbook for Application),' pp. 535-536, PLENUM
9. Virdee M. S., 'Non-contacting Straightness Measurement to Nanometer Accuracy,' Int. J. of Machine Tool & Manufacture, Vol. 35, No.2, pp. 157-164
10. Guu S. M. and TSAI D. M., 1999, 'Measurement of Roundness : a Nonlinear Approach,' Proc. Nalt. Sci. Counc. ROC(A), Vol. 23, No.3, pp. 348-349