Analysis on the Core Loss and Windage Loss in Permanent Magnet Synchronous Motor for High-Speed Application

고속으로 운전되는 영구자석형 동기전동기의 철손 및 풍손 해석

  • 장석명 (충남대 공대 전기공학과) ;
  • 고경진 (충남대 공대 전기공학과) ;
  • 조한욱 (충남대 공대 전기공학과)
  • Published : 2006.10.01

Abstract

Recently, more attention has been paid to the development of high-speed permanent magnet (PM) synchronous motors, since they are conductive to high efficiency, high power density, small size, and low weight. In high-speed PM machines, core loss and windage loss form a larger proportion of the total losses than usual in conventional mid- or low speed machines. This article deals with the analysis on the core loss and windage loss in PM synchronous motor for high-speed application. Using the data information from a manufacturer and non-linear curve fitting, this paper investigates the magnetic behavior and its core losses in the stator core using the electrical steels. And, the windage loss is calculated according to the variation of the rotational speed, motor inner pressure and temperature.

References

  1. 하경호,차상윤,김재관,홍정표,'영구자석형 모터의 고정자 철심에서 자계의 거동 및 철손 분석,'대한전기학회 논문지, vol.55B, no.2, pp.76-82, Feb. 2006
  2. C. Mi, G. R. SIemon, R. Bonert, 'Modeling of iron losses of permanent magnet synchronous motors,' IEEE Trans. Ind. Applicat., vol. 39, May/June 2003 https://doi.org/10.1109/TIA.2003.810635
  3. C. A. Hernandez- Aramburo, T. C. Green, A. C. Smith, 'Estimating rotational iron losses in an induction machine,' IEEE Trans. Magn., vol. 39, November 2003 https://doi.org/10.1109/TMAG.2003.819451
  4. C. C. Mi, G. R SIemon, R Bonert, 'Minimization of iron losses of permanent magnet synchronous machines,' IEEE Trans. Energy Conv., vol. 20, March 2005 https://doi.org/10.1109/ICEMS.2001.971802
  5. 철손 해석 및 측정 기술 개발에 관한 최종보고서, 통상산업부,1997
  6. 김태형,'FRM의 새로운 설계 기법 및 PWM 구동시제특성 해석,' 한양대학교 박사학위논문,2005
  7. K. Yamazaki, and S. Watari, 'Loss analysis of permanent magnet motor considering carrer harimonics of PWM inverter using combination of 2-D and 3-D finite-element method,' IEEE Trans. Magn., vol.41, May 2005 https://doi.org/10.1109/TMAG.2005.846278
  8. Seok-Myeong Jang, Han-Wook Cho, Yeon-Ho Jeong, 'Influence on the rectifiers of rotor losses in high-speed permanent magnet synchronous alternator,' Journal of Applied Physics, vol. 99, 08R315, 2006 https://doi.org/10.1063/1.2171113
  9. 전기강판 제품 개발 동향, 신전력기기연구센터(FEMRC)워크샵 자료집,2005
  10. Y. Chen, and P. Pillay, 'An Improved formula for lamination core loss calculations In machines operating with high frequency and high flux density excitation,' Industry Applications Conference, 2002. 37th IAS Annual Meeting. Conference Record of the Volume 2, 13-18 Oct. 2002 Page(s):759 - 766 vol.2 https://doi.org/10.1109/IAS.2002.1042645
  11. Jeong- Jong Lee, Young- Kyoun Kim, Hyuck Nam, Kyung-Ho Ha, Jung-Pyo Hong, 'Loss distribution of three phase induction motor fed by pulsewith modulated inverter,' IEEE Trans. Magn., vol.40, pp.762-765, 2004 https://doi.org/10.1109/TMAG.2004.825445
  12. Michael D. Werst, Jonathan J.Hahne, Hsing PLiu, and Charles E. Penney, 'Design and Testing of a high speed spin test for evaluating pulse alternator windage loss effects,' vol.39, pp.389-393, 2003 https://doi.org/10.1109/TMAG.2002.806407
  13. Ajisrnan, Jun Kobuchi, Ken Oobayashi, Uyuichi Shimada, 'Windage loss reduction of flywheel! generator system using He and SF6 gas mixtures,' Energy Conversion Engineering Conference (IECEC-97), vol 3, pp. 1754 - 1757, 1997 https://doi.org/10.1109/IECEC.1997.656687
  14. Awad, M.N.; Martin, W.J, 'Windage loss reduction study for TFTR pulse generator,' Fusion Engineering, 17th IEEE/NPSS Symposium, vol. 2, pp.1l25 - 1128, 1997 https://doi.org/10.1109/FUSION.1997.687822