Trends of Research in Fracture Toughness of Rocks

국내외 암석의 파괴인성

  • 양형식 (전남대학교 건설지구환경공학부) ;
  • 김종관 (전남대학교 대학원 지구시스템공학과)
  • Published : 2007.12.31

Abstract

Papers on fracture toughness of rock were surveyed. In spite of variety in methods and nations, it seemed that same rock type shows similar fracture toughness value.

References

  1. P.M. Amaral, L. Guerra Rosa, J. Cruz Fernandes, 1999, Fracture toughness of different types of granite, International Journal of Rock Mechanics and Mining Sciences, Vol. 36, No.6, pp. 839-842 https://doi.org/10.1016/S0148-9062(99)00041-8
  2. Z.X. Zhang, 2002, An empirical relation between mode I fracture toughness and the tensile strength of rock, International Journal of Rock Mechanics and Mining Sciences, Vol. 39, No.3, pp. 401-406 https://doi.org/10.1016/S1365-1609(02)00032-1
  3. R. A. Bearman, 1998, The use of the point load test for the rapid estimation of Mode 1 fracture toughness, International Journal of Rock Mechanics and Mining Sciences, Vol. 36, No.2, pp. 257-263 https://doi.org/10.1016/S0148-9062(99)00015-7
  4. 신재근, 이상은, 임한욱, 2000, 미소 파괴음 빈도 측정에 의한 화강암의 파괴인성 평가에 관한 연구, 터널과 지하 공간, 제10권, pp. 227-236
  5. M.H.B. Nasseri, A. Schubnel, R.P. Young, 2007, Coupled evolutions of fracture toughness and elastic wave velocities at high crack density in thermally treated Westerly granite, International Journal of Rock Mechanics & Mining Sciences, Vol. 44, pp. 601-616 https://doi.org/10.1016/j.ijrmms.2006.09.008
  6. 윤정석, 전석원, 2003, 암석의 전단 파괴인성 측정에 관한 실험적 연구, 터널과 지하공간, 제13권 1호 pp. 64-75
  7. Qiuhua Rao, Zongqi Sun, O. Stephansson, Chunlin Li, B. Stillborg, 2003, Shear fracture (Mode II) of brittle rock, International Journal of Rock Mechanics & Mining Sciences, Vol. 40, pp. 355-375 https://doi.org/10.1016/S1365-1609(03)00003-0
  8. 장수호, 이정인, 1999, 인장, 전단 및 혼합모드에서 디스크 시험편을 이용한 암석의 파괴인성 측정에 관한연구, 터널과 지하공간, 제9권, pp. 315-327
  9. R.D. Dwivedi, A.K. Soni, R.K. Gael and A.K. Dube, 2000, Fracture toughness of rocks under sub-zero temperature conditions, International Journal of Rock Mechanics and Mining Sciences, Vol. 37, No.8, pp. 1267-1275 https://doi.org/10.1016/S1365-1609(00)00051-4
  10. S. Kahraman , R. Altindag, 2004, A brittleness index to estimate fracture toughness, International Journal of Rock Mechanics & Mining Sciences, Vol. 41, pp. 343-348 https://doi.org/10.1016/j.ijrmms.2003.07.010
  11. M.H.B. Nasseri, B. Mohanty, P.-Y. F. Robin, 2005, Characterization of microstructures and fracture toughness in five granitic rocks, International Journal of Rock Mechanics & Mining Sciences, Vol. 42, pp. 450-460 https://doi.org/10.1016/j.ijrmms.2004.11.007
  12. T. Backers, O. Stephansson, E. Rybacki, 2002, Rock fracture toughness testing in Mode II-punch-through shear test, International Journal of Rock Mechanics & Mining Sciences, Vol. 39, pp. 755-769 https://doi.org/10.1016/S1365-1609(02)00066-7
  13. M.J. Iqbal, B. Mohanty, 2006, Experimental calibration of stress intensity factors of the ISRM suggested cracked chevron-notched Brazilian disc specimen used for determination of mode-l fracture toughness, International Journal of Rock Mechanics & Mining Sciences, Vol. 43, pp. 1270-1276 https://doi.org/10.1016/j.ijrmms.2006.04.014
  14. T. Bakers, G. Dresen, E. Rybacki, O. Stephansson, 2004, New data on Mode II fracture toughness of rock of Rock Mechanics & Mining Sciences, Vol. 41, pp. 351-352 https://doi.org/10.1016/j.ijrmms.2003.12.059
  15. 정해석, 전석원, 2004, 이중 비틀림 시험에서 유도 홈의 형상이 암석의 응력부식지수에 미치는 영향, 터널과 지하 공간, 제14권 제5호, pp.363-372
  16. M. Stavropoulou, 2006, Modeling of small-diameter rotary drilling tests on marbles, International Journal of Rock Mechanics & Mining Sciences, pp. 1034-1051