DOI QR코드

DOI QR Code

Effect of Coiling Temperature on the Annealed Texture in Cu/Nb Added Ultra Low Carbon Steels

  • Jiang, Yinghua (Division of Advanced Materials Engineering, Chonbuk National University) ;
  • Park, Young-Koo (Division of Advanced Materials Engineering, Chonbuk National University) ;
  • Lee, Oh-Yeon (Division of Advanced Materials Engineering, Chonbuk National University)
  • Published : 2008.02.25

Abstract

The present work was performed to investigate the effect of coiling temperature on the annealed texture in Cu/Nb-added ultra-low-carbon steels. The ultra-low-carbon steels were coiled at 650 and $720^{\circ}C$, respectively. The result showed that the Cu-added ultra-low-carbon steel at a low coiling temperature produced a desirable annealed texture related to good formability. On the other hand, Nb-added ultra-low-carbon steel at a high coiling temperature also produced a desirable texture. This is attributed to the effect of Nb, which retards recrystallization during the coiling process.

References

  1. K. Tsuzaki, N. R. Ileda and T. Maki, Scripta Mater, 36, 905 (1997) https://doi.org/10.1016/S1359-6462(96)00495-2
  2. M. R. Barnett and J. J. Jonas, ISIJ Inter, 37, 706 (1997) https://doi.org/10.2355/isijinternational.37.706
  3. R. Mendoza, J. Huante, M. Alanis, C. Gonzalez and J. A. Juarez, Mater. Sci. Eng, 276, 203 (2000) https://doi.org/10.1016/S0921-5093(99)00267-1
  4. L. M. Storozheva, R. Bode and K. Hulka, Met. Sci. Heat Treat., 44(3), 6 (2002) https://doi.org/10.1023/A:1019666003371
  5. M. Morita, K. Sato and Y. Hosoya, ISIJ Inter, 34, 92 (1994) https://doi.org/10.2355/isijinternational.34.92
  6. K. M. Tiitto, C. Jung and P. Wray, ISIJ Inter, 44, 404 (2004) https://doi.org/10.2355/isijinternational.44.404
  7. K. Eloot, K. Okuda and K. Sakata, ISIJ Inter, 38, 602 (1998) https://doi.org/10.2355/isijinternational.38.602