Development of an Automated Design System for Oil Pumps with Multiple Profiles(Circle, Ellipse and Involute)

원, 타원 및 인벌루트 조합된 치형형상을 갖는 로터 개발

  • Jung, Sung-Yuen (Research Institute of Mechanical Technology, Pusan National Univ.) ;
  • Kim, Moon-Saeng (School of Mechanical Engineering, Pusan National Univ.) ;
  • Cho, Hae-Yong (School of Mechanical Engineering, Chungbuk National University) ;
  • Kim, Chul (Research Institute of Mechanical Technology, Pusan National Univ.)
  • 정성윤 (부산대학교 기계기술연구원) ;
  • 김문생 (부산대학교 기계공학부) ;
  • 조해용 (충북대학교 기계공학부) ;
  • 김철 (부산대학교 기계기술연구원)
  • Published : 2009.03.01

Abstract

A internal lobe pump is suitable for oil hydraulics of machine tools, automotive engines, compressors, constructions and other various applications. In particular, the pump is an essential machine element of an automotive engine to feed lubricant oil. The subject of this paper is the theoretical analysis of internal lobe pump whose the main components are the rotors: usually the outer one is characterized by lobe with elliptical and involute shapes, while the inner rotor profile is determined as conjugate to the other. And the integrated system which is composed of three main modules has been developed through AutoLISP under AutoCAD circumstance. It generates new lobe profile and calculates automatically the flow rate and flow rate irregularity according to the lobe profile generated. Results obtained from the analysis enable the designer and manufacturer of oil pump to be more efficient in this field.

References

  1. Colbourne, J. R., "Gear Shape and Theoretical Flow Rate in Internal Gear Pumps," Transactions of the CSME, Vol. 3, No. 4, pp. 215-223, 1975
  2. Saegusa, Y., Urashima, K., Sugimoto, M., Onoda, M. and Koiso,T., "Development of Oil-Pump Rotors with a Trochoidal Tooth Shape," SAE Paper, No. 840454, 1984
  3. Tsay, C. B. and Yu, C. Y., "Mathematical Model for the Profile of Gerotor Pumps," J. CSME, Vol. 10, No. 1, pp. 41-47, 1989
  4. Yu, C. Y. and Tsay, C. B., "The Mathematical Model of Gerotor Pump Applicable to Its Characteristic Study," J. CSME, Vol. 11, No. 4, pp. 385-391, 1990
  5. Lee, S. C. and Lee, S. N., "Design and Analysis of Gerotor for Hydraulic Motors," Journal of KSTLE, Vol. 11, No. 2, pp. 63-70, 1995
  6. Mimmi, G. C. and Pennacchi, P. E., "Involute Gear Pumps Versus Lobe Pumps: A Comparison," J. of Mechanical Design, Vol. 119, No. 4, pp. 458-465, 1997 https://doi.org/10.1115/1.2826390
  7. Kim, C. H., Kim, D. I., Ahn, H. S. and Chong, T. H., "Analysis of Tooth Contact Stress of Gerotor Hydraulic Motors," J. of KSTLE, Vol. 15, No. 2, pp. 164-170, 1999
  8. Kim, J. H. and Kim, C., "Development of an Integrated System of Automated Design of Gerotor Oil Pump," J. of KSPE Vol. 23, No. 2, pp. 88-96, 2006
  9. Kim, J. H., Kim, C. and Chang, Y. J., "Optimum Design on Lobe Shapes of Gerotor Oil Pump," J. of Mechanical Science and Technology, Vol. 20, Issue 9,pp. 1390-1398, 2006 https://doi.org/10.1007/BF02915962
  10. Chang, Y. J., Kim, J. H., Jeon, C. H., Kim, C. and Jung, S. Y., "Development of an Integrated System for the Automated Design of a Gerotor Oil Pump," J. of Mechanical Design, Vol. 129, Issue 10, pp. 1099- 1105, 2007 https://doi.org/10.1115/1.2757629
  11. Colbourne, J. R., "The Geometry of Involute Gears," Springer, pp. 24-44, 1987