Determination of Optimal Locations for Measuring Displacements to Adjust Cable Tension Forces of Cable-Stayed Bridges

사장교 시공 중 케이블 장력 보정을 위한 최적 변위계측 위치 결정

  • Received : 2008.02.04
  • Accepted : 2008.11.12
  • Published : 2009.03.30

Abstract

The paper presents an algorithm of selecting optimal locations for measuring displacements(OLD) to adjust cable tension forces during the construction of cable-stayed bridges. The rank for optimal locations can be determined from the effective independence distribution vectors(EIDV) that are computed from the Fisher Information Matrices(FIM) formulated with the displacement sensitivities. To examine the efficiency and reliability of the proposed algorithm for determining OLD, a simulation study on a cable-stayed bridge has been carried out. The results using FIM formulated with displacements are compared with those using FIM with displacement sensitivities through the simulation study. The effects of measurement noise and error in cable length on the adjustment of cable tension forces are evaluated statistically by applying the Monte Carlo scheme.

Acknowledgement

Supported by : 서울대학교

References

  1. 강태우, 권순정, 신수봉, "최적 측정위치 선택 방법들의 비교 연구", 한국전산구조공학회 가을 학술발표회논문집, 2001, pp. 253-260
  2. 김호경, 시공 상태를 고려한 현수교의 3차원 해석, 공학박사학위논문, 서울대학교, 1993
  3. 권순정, 주파수영역과 시간영역에서의 가속도계 최적위치 결정 및 SI기법에 의한 검증, 공학박사학위논문, 인하대학교, 2006
  4. 안상섭, 탄성현수선 케이블요소를 이용한 3차원 케이블망의 정적 및 동적 비선형 해석, 공학석사학위논문, 서울대학교, 1991
  5. 이민권, 이해성, "대칭형 강 사장교의 폐합해석과 시공오차의 예측", 대한토목학회논문집, 제26권 제1A호, 2006, pp. 55-65
  6. 허광희, 최만용, "사장교의 상시감시를 위한 최적 센서 구성", 구조물진단학회지, 제6권 제2호, 2002, pp. 145-155
  7. Fadale, T.D., Nenarokomov, A.V. and Emery, A.F. "Two Approaches to Optimal Sensor Locations", J of Heat Transfer, Vol. 117, 1995, pp. 373-379 https://doi.org/10.1115/1.2822532
  8. Goodwin, G.C. and Payne, R.L., Dynamic System Identification: Experiment Design and Data Analysis, Academic Press, London, 1977
  9. Kim, K.S. and Lee, H.S., "Analysis of Target Configurations under Dead Loads for Cablesupported Bridges", Computers & Structures, Vol. 79, Issue 29-30, 2001, pp. 2681-2692 https://doi.org/10.1016/S0045-7949(01)00120-1
  10. Kwon, S.J., Woo, S. and Shin, S., "Deter-Mination of Optimal Accelerometer Locations Using Modal Sensitivity for Identifying a Structure", Smart Structures and Systems, August, 2008(to be published)
  11. Penny, J.E.T., Friswell, M.I. and Garvey, S.D., "Automatic Choice of Measurement Locations for Dynamic Testing", AIAA J., Vol. 32, No. 2, 1994, pp. 407-414 https://doi.org/10.2514/3.11998
  12. Udwadia, F.E., "Methodology for Optimum Sensor Locations for Parameter Identification in Dynamic Systems", J. of Eng. Mech., ASCE, Vol. 120, No. 2, 1994, pp. 368-390 https://doi.org/10.1061/(ASCE)0733-9399(1994)120:2(368)