A Study on the Development of Rapidly Hardening Grouting Method for the Effective Filling in the Underground Cavity

지하공동의 효율적 충전을 위한 급결 충전 그라우트공법개발에 관한 연구

  • 김수로 (한국광해관리공단 광해기술연구소) ;
  • 김태혁 (한국광해관리공단 광해기술연구소) ;
  • 신동춘 (벽산엔지니어링 지반사업부) ;
  • 권현호 (한국광해관리공단 광해기술연구소)
  • Published : 2009.12.31


The collapse of the underground cavity can cause the abrupt local subsidence of the ground surface. It can be hazardous to the stability of road and building for human activity. Therefore it is necessary to develop reinforcement methods for the filling of the underground cavity. This study was executed to improve the material quality and systems to fill the calcium-aluminate mineral $(C_{12}A_7)$ environmentally, and minimize the loss of filling materials for the steep underground cavity. Filling material which was developed in this study is composed of rapid hardening material and additives. The developed material had rapid hardening and non-separation ability in the water cavity condition, so it made the effective underground dam in the cavity with prevention of material loss when it was poured in the water cavity. Results of heavy metal leaching test for environmental assessment showed that it was environmentally suiTable material for the filling in the mine cavity.


Subsidence;Abandoned Mine;Underground cavity;calcium-aluminate mineral;heavy metal leaching test


  1. 권현호, 남광수, 2007, 광해방지공학, 동화기술, 2-12, pp. 111-115
  2. 이병윤, 전석원, 2008, 급경사 채굴적 충전용 그라우트 재료의 특성 연구, 한국지구시스템공학회지, Vol. 45, No. 6, pp. 1-14
  3. Byung-yoon Lee, Seokwon Jeon, 2009, Determination of mine backfill capacity of an inclined cavity, International Symposium on Mine Reclamation, pp. 218-220
  4. ISRM, 1979, Suggested methods for determining the uniaxial compressive strength and deformability of rock materials, Intermational Journal of Rock mechanics and Mining Sccience and Geomechanics Abstracts, vol. 16, pp. 137-140
  5. JSCE(2003). Concrete Library 111. Tokyo :Japan Society of Civil Engineers
  6. Swan, G, 1985, A New approach to cemented backfill design. CIM Bulletin, Vol. 78 No. 884, 53-58
  7. Potvin, y., Thomas, E, Fourie, A., 2005, Handbook on mine fill, ACG, pp. 17-18
  8. QCL Group, 1999, The Hardening of Portland Cement
  9. ASTM (D 3967-95a), 2005, Standard Test Methods for Splitting Testing Strength of Intact Rock Core Specimens, Annual Book of ASTM Standard
  10. 송태웅, 1994, 조강형 특수시멘트의 개발동향 - 요업재료의 과학과 기술
  11. 정종주, 1993, 물유리계 지반 주입재의 내구성에 관한 연구, 석사학위논문, 한양대학교, pp. 69-72
  12. 김상현 등, 2003, 시멘트 광물계 및 액상 급결제를 사용한 숏크리트의 특성비교, 시멘트 심포지움