Naturally Cyclable Biocomposites

자연순환형 바이오복합재료

  • Cho, Dong-Hwan (Polymer/Bio-Composites Research Lab, Department of Polymer Science and Engineering, Kumoh National Institute of Technology) ;
  • Kim, Hyun-Joong (Lab of Adhesion and Bio-Composites, Program in Environmental Materials Science, Seoul National University)
  • 조동환 (금오공과대학교 고분자공학과) ;
  • 김현중 (서울대학교 농업생명과학대학 산림과학부 환경재료과학)
  • Published : 2009.03.30




  1. A. B. Strong, 'Fundamentals of Composites Manufacturing: Materials, Methods, and Applications', SME, Dearborn, 2008
  2. M. M. Schwartz (Ed.), 'Composite Materials Handbook', McGraw-Hill, Inc., New York, 1992
  3. B. Z. Jang, 'Advanced Polymer Composites: Principles and Applications', ASM International, Materials Park, 1994
  4. P. Morgan, 'Carbon Fibers and Their Composites', Taylor & Francis, Boca Raton, 2005
  5. D. Hull, 'An Introduction to Composite Materials', Cambridge University Press, Cambridge, 1982
  6. D. Cho, S. G. Lee, W. H. Park, and S. O. Han, 'Eco-friendly biocomposite materials using biofibers', Polym. Sci. Tech., 13(4), 460 (2002)
  7. D. Cho, '바이오복합재료', Polym. Sci. Tech., 13(1), 81 (2002)
  8. A. K. Mohanty, M. Misra, and L. T. Drzal, 'Sustainable bio-composites from renewable resources: opportunities and challenges in the green materials world', J. Polym. Environ., 10(1/2), 19 (2002)
  9. A. K. Mohanty, M. Misra, and L. T. Drzal, (Eds) 'Natural Fibers, Biopolymers, and Biocomposites', Taylor & Francis, Boca Raton (2005) Chapter 1
  10. D. Cho, '친환경 천연섬유를 활용하는 그린복합재료', Plastic Magazine, 22, 44-51 (2006)
  11. A. Rouilly and L. Rigal, 'Agro-materials: a bibliographic review', J. Macromol. Sci., C42(4), 441 (2002)
  12. R. Fisher, 'Natural fibers and green composites', Composites Manufacturing, March, 20 (2006)
  13. S. G. Lee, D. Cho, W. H. Park, and S. O. Han, 'Environmentally friendly composites using natural fibers', Fiber Tech. Ind., 8(4), 378 (2004)
  14. B. Madsen and H. Lilholt, 'Guideline for mechanical design with biocomposites: properties, weight and cost', JEC Composites Magazine, 37, 37 (2007)
  15. S. O. Han, S. M. Lee, W. H. Park, and D. Cho, 'Mechanical and thermal properties of waste silk fiber-reinforced poly(butylene succinate) biocomposites', J. Appl. Polym. Sci., 100, 4972 (2006)
  16. K. H. Kim, D. Cho, and J. H. Kim, 'Fabrication and properties of natural fiber-reinforced waste wool/polypropylene composites (NFRP)', J. Adhes. Interf., 9(2), 16 (2008)
  17. A. Arbelaiz, G. Cantero, B. Fernandez, I. Mondragon, P. Ganan, and J. M. Kenny, 'Flax fiber surface modifications: effects on fiber physico mechanical and flax/polypropylene interface properties', Polym. Compo., 26, 324 (2005)
  18. G. Mehta, L. T. Drzal, A. K. Mohanty, and M. Misra, 'Effect of fiber surface treatment on the properties of biocomposites from nonwoven industrial hemp fiber mats and unsaturated polyester resin', J. Appl. Polym. Sci., 99, 1055 (2006)
  19. J. M. Seo, D. Cho, W. H. Park, S. O. Han, T. W. Hwang, C. H. Choi, and S. J. Jung, 'Fiber surface treatments for improvement of the interfacial adhesion and flexural and thermal properties of jute/poly(lactic acid) biocomposites', J. Biobased Mater. Bioener., 1, 331 (2007)
  20. Y. H. Han, S. O. Han, D. Cho, and H.-I. Kim, 'Kenaf/polypropylene biocomposites: effects of electron beam irradiation and alkali treatment on kenaf natural fibers', Compo. Interfaces, 14(5/6), 559 (2007)
  21. Y. Li and K. L. Pickering, 'Hemp fibre reinforced composites using chelator and enzyme treatments', Compo. Sci. Tech., 68, 3293 (2008)
  22. A. K. Mohanty, L. T. Drzal, D. Hokens, and M. Misra, 'Eco-friendly composite materials from biodegradable polymers: biocomposites to nanocomposites,' Polym. Mater. Sci. Eng., 85, 594 (2001)
  23. S. M. Lee, D. Cho, W. H. Park, S. G. Lee, S. O. Han, and L. T. Drzal, 'Novel silk/poly(butylene succinate) biocomposites: the effect of short fiber content on their mechanical and thermal properties', Compo. Sci. Tech., 65, 647 (2005)
  24. L. A. Pothan, S. Thomas, and G. Groeninckx, 'The role of fibre/matrix interactions on the dynamic mechanical properties of chemically modified banan fibre/polyester composites', Composites: Part A, 37, 1260 (2006)
  25. S. S. Tripathy, G. Levita, and D. Landro, 'Interfacial adhesion in jute-polyolefin composites', Polym. Compo., 22, 815 (2001)
  26. A. K. Mohanty, M. Misra, and G. Hinrichsen, 'Biofibers, biodegradable polymers and biocomposites: An overview', Macromol. Mater. Eng., 276/277, 1 (2000)<1::AID-MAME1>3.0.CO;2-W
  27. S. Shibata, Y. Cao, and I. Fukumoto, 'Lightweight laminate composites made from kenaf and polypropylene fibres', Polym. Test., 25(2), 142 (2006)
  28. P. J. Franco and A. Valadez-Gonzalez, 'A study of the mechanical properties of short natural-fiber reinforced composites', Composites: Part B, 36, 597 (2005)
  29. S. H. Aziz and M. P. Ansell, 'The effect of alkalization and fibre alignment on the mechanical and thermal properties of kenaf and hemp bast fibre composits: Part 1-polyester resin matrix', Compo. Sci. Tech., 64, 1219 (2004)
  30. M. Abdelmouleh, S. Boufi, M. N. Belgacem and A. Dufresne, 'Short natural-fibre reinforced polyethylene and natural rubber composites: Effect of silane coupling agents and fibres loading', Compo. Sci. Tech., 67, 1627-1639 (2007)
  31. B. Y. Chu, M. Y. Kwon, S. G. Lee, D. Cho, W. H. Park, and S. O. Han, 'Interfacial adhesion of silk/PLA biocomposites by plasma surface treatment', Adhes. Interf., 5(4), 9 (2004)
  32. Y. Pang, D. Cho, S. Ok Han, and W. H. Park, 'Interfacial shear strength and thermal properties of electron beam-treated henequen fiber reinforced unsaturated polyester composites', Macromol. Res., 13(5), 453 (2005)
  33. S. O. Han, D. Cho, W. H. Park, and L. T. Drzal, 'Henequen/poly(butylene succinate) biocomposites: electron beam irradiation effects on henequen fiber and the interfacial properties of biocomposites', Compo. Interf., 13(2/3), 231 (2006)
  34. D. Cho, S. M. Lee, S. G. Lee, and W. H. Park, 'Effect of acetylation and plasma treatment on the interfacial and thermal properties of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/woven flax fabric biocomposites', Am. J. Appl. Sci., Special Issue (Bio-compatible and Bio-composite Materials), 17 (2006)
  35. D. Cho, J. M. Seo, H. S. Lee, C. W. Cho, S. O. Han, and W. H. Park, 'Property improvement of natural fiber-reinforced green composites by water treatment', Adv. Compo. Mater., 16(4), 299 (2007)
  36. D. Cho, H. S. Lee, S. O. Han, and L. T. Drzal, 'Effects of E-beam treatment on the interfacial and mechanical properties of henequen/polypropylene biocomposites', Adv. Compo. Mater., 16(4), 315 (2007)
  37. H. S. Lee, D. Cho, and S. O. Han, 'Effect of natural fiber surface treatments on the interfacial and mechanical properties of henequen/polypropylene biocomposites', Macromol. Res., 16(5), 411 (2008)
  38. J. M. Seo, D. Cho, and W. H, Park, 'Alkali treatment effect of kenaf fibers on the characteristics of kenaf/PLA biocomposites', J. Adhes. Interf., 9(4), 1 (2008)
  39. D. Cho, H. S. Lee, and S. O. Han, 'Effect of fiber surface modification on the interfacial and mechanical properties of kenaf fiber-reinforced thermoplastic and thermosetting polymer composites', Compo. Interf., Accepted for publication
  40. D. Cho and S. B. Yoon, 'Cellulose-based natural fiber topography and the interfacial shear strength of henequen/unsaturated polyester composites: influence of water and alkali treatments', Compo. Interf., Accepted for publication
  41. Q. Zhou, D. Cho, B. K. Song, and H.-J. Kim, 'Novel jute/polycardanol biocomposites: effect of fiber surface treatment on their properties', Compo. Interf., Accepted for publication